The Cisco® 819 4G LTE Integrated Services Routers (ISR) are the smallest Cisco IOS® Software routers with support for integrated fourth-generation (4G LTE) wireless WAN (mobile broadband backhaul) capabilities (Figure 1). They come in both hardened and non-hardened form factors. They are rapidly deployable, highly available, reliable, and secure, and are designed specifically for machine-to-machine (M2M) applications. Markets that benefit from these applications include industrial automation, small business, financial, healthcare, and retail. Fully integrated with Cisco IOS Software, the Cisco 819 4G LTE ISRs deliver enterprise-class features, including highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. The Cisco 819 4G LTE 2.0 M2M is the industry leader to bring enterprise grade wireline like functionality such as Quality of Service (QoS) for cellular, Multi-Virtual Route Forwarding (Multi-VRF), advanced VPN, and Unified Communications solutions over LTE.

Figure 1.      Cisco 819 Non-Hardened 4G LTE 2.0 Integrated Services Router

 

Figure 2.      Cisco 819 Hardened 4G LTE 2.0 Integrated Services Router

A critical component of the Cisco M2M architecture, the Cisco 819 4G LTE ISRs serve as the single, horizontal platform that enhances the Cisco implementation of “any device, anywhere” across multiple industries, including small business, small remote branch, banking, retail, healthcare, and government. It also provides the ability to extend Cisco product-based networks to small branch offices with a relatively low incremental investment, as well as to enable managed services offerings based on Cisco architecture.

Product Overview

The Cisco 819 4G LTE ISRs support the latest Third-Generation Partnership Project (3GPP) Release 8 Category 3 LTE standards. They provide persistent, reliable LTE connectivity with fallback and transparent handoff to earlier technologies. The following models are available:

   C819G-4G-GA-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 800 MHz (band 20), 900 MHz (band 8), 1800 MHz (band 3), 2100 MHz (band 1), or 2600 MHz (band 7) networks; backward-compatible with UMTS and HSPA+: 850 MHz (band 5), 900 MHz (band 8), 1900 MHz (band 2), and 2100 MHz (band 1).

   C819G-4G-NA-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 700 MHz (band 17), 1900 MHz (band 2 PCS), 850 MHz (band 5), or 1700/2100 MHz (band 4 AWS) networks; backward-compatible with UMTS and HSPA+: 850 MHz (band 5), 900 MHz (band 8), 1900 MHz (band 2 PCS), and 1700/2100 MHz (band 4 AWS).

   C819G-4G-VZ-K9 and C819G-4G-ST-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 700 MHz (band 13), 1700/2100 MHz (band 4 AWS), or 1900 MHz (band 25 extended PCS) networks; backward-compatible with EVDO Rev A/CDMA 1x BC0, BC1, BC10.

   C819G-LTE-MNA-K9 and C819HG-LTE-MNA-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 700 MHz (band 17), 1900 MHz (band 2 PCS), 850 MHz (band 5), 700 MHz (band 13), 1900 MHz (band 25 extended PCS) networks; or 1700/2100 MHz (band 4 AWS) networks; backward-compatible with UMTS and HSPA+: 850 MHz (band 5), 900 MHz (band 8), 1900 MHz (band 2 PCS), and 1700/2100 MHz (band 4 AWS), with EVDO Rev A/CDMA 1x BC0, BC1, BC10.

 

 

The Cisco 819 4G LTE ISRs include a broad range of enterprise-class features:

   Security services, including firewall, intrusion prevention, VPN, and Cisco ISR Web Security with ScanSafe, which requires no additional hardware or client software. This enables branch offices, manufacturing sites, hospitals, and banks, for example, to intelligently redirect web traffic to the cloud to enforce granular security and acceptable use policies over user web traffic. With this solution, you can deploy market-leading web security quickly and easily to protect branch office users from web-based threats, such as viruses, while saving bandwidth, money, and resources.

   Cisco WAN optimization system, consisting of Wide Area Application Services (WAAS) Express routers and Wide Area Application Engines (WAEs) that work together to optimize TCP traffic in your network. When client and server applications attempt to communicate with each other, the network intercepts the traffic and acts on behalf of the client application and the destination server.

   Additional WAN options such as Serial and Gigabit Ethernet WAN interfaces and a 4-port 10/100 Fast Ethernet managed switch for LAN connectivity. Quality-of-service (QoS) features are included for optimizing voice and video applications.

   Cisco Configuration Professional, a web-based configuration tool that simplifies setup and deployment. Centralized management capabilities give network managers visibility into and control over the network configurations at remote sites.

   4G LTE wireless WAN (WWAN) data services. With enhanced data rates and improved latency (30 milliseconds or less), WWAN services are an ideal way to supplement traditional wire-line services. 4G LTE WWAN data services have average data rates well in excess of ISDN speeds, with theoretical limits of 100 Mbps on the downlink and 50 Mbps on the uplink. Actual data speed depends on the service provider’s network. With 4G LTE data rates, the Cisco 819 4G LTE ISRs offer a primary WAN link capable of running comprehensive branch-office services, including voice and video services. The 4G LTE WWAN data services can also be used as a cost-effective alternative in areas where broadband services are either not available or very expensive. Cisco is building on these performance milestones and adding support for wireless to our wide variety of WAN interface alternatives.

   Multiple-PDN: This feature allows configuration of multiple active (Access Point Name) APN so that Internet traffic can be kept separate from the corporate traffic.

   4G LTE multiple-bearer QoS for cellular: The Cisco 819 4G LTE supports 4G LTE multiple-bearer QoS. Detailed information on the bearer is part of show CLI, SNMP-MIBs etc. The QoS feature is service provider (SP) dependent, and requires SP to launch this service.

   Multi-VRF for cellular: 4G LTE C819s now support Multi-VRF for cellular network. Multi-VRF is a Cisco proprietary implementation over and above the 3GPP spec and requires Cisco ASR5K Packet Gateway (P-GW) as the head-end at the service provider’s network. The Multi-VRF feature is service provider (SP) dependent, and requires SP to launch this service.

   Enterprise grade Unified Communication solutions over LTE: The 4G LTE C819s supports voice and video and can be integrated with Cisco Unified Communications cloud or premises-based infrastructure.

   Public Land Mobile Network (PLMN Search): UE presents end user with available PLMN search manuallyUE can optimize PLMN search procedure using stored information such as RF carriers and cell parameters.

 

Business Benefits and Application Examples

Businesses are looking for ways to reduce costs, increase revenue, and improve business continuity. The 4G LTE wireless connectivity, which is 10 to 15 times faster and has 5 times lower latency than 3G links, allows a small enterprise branch office or remote office to set up comprehensive media services in a matter of hours, without worrying about availability of broadband services and the need to lay down lines. Wireless carriers offer flexible, usage-based data plans that can be customized to meet the needs and price points of the business customer. As WAN backup alternatives, 3G and 4G LTE wireless offer greater WAN diversity and resiliency because they are independent of the local terrestrial infrastructure. The Cisco 819 4G LTE ISRs enable businesses to stay productive during service provider downtime or a network failure.

Ability to Host Networks in Motion

The Cisco 819 4G LTE ISRs use standards-based Mobile IP features in Cisco IOS Software to host networks in motion. Transition to different wireless networks is transparent to the users and devices (such as laptops, smart devices, and surveillance cameras), and applications maintain continuous connectivity without the user’s manual intervention as WAN links change. In addition to allowing a single node or device to stay connected, the Cisco 819 4G LTE ISRs allow an entire mobile network or subnet to stay connected.

Retail VPN

Retail stores migrating from dialup connections for point-of-sale transactions can use the WWAN capability of the Cisco 819 4G LTE ISRs for low-cost broadband access, with the required security to comply with payment-card-industry and other data security requirements. Multiple devices and applications can then be added to the store network to take advantage of the increased bandwidth and to enable highly secure mobility and enhance productivity.

Managed Services

Service providers and value-added resellers can use the Cisco 819 4G LTE ISRs as a platform to offer differentiated business-class security services for small and medium-sized business (SMB) customers. Superior management capabilities such as Simple Network Management Protocol (SNMP) support for 3G MIB with 4G LTE MIB extension and Cisco Configuration Professional make remote management and provisioning easier.

 

Primary Features and Benefits

Table 1 lists the features and benefits of the Cisco 819 4G LTE ISRs.

Table 1.       Features and Benefits

Features

Benefits

Smallest Cisco ISR in Non-Hardened Form Factor

Single platform for multiple applications

  This single architecture is uniquely designed for deployments in multiple remote applications such as ATM machines, kiosks, small branch offices, remote teleworker sites, gas stations, and telemetry, and across all industries.
  Hardened models extend the ISR footprint into deployments wherein the router is exposed to extreme environmental conditions such as heat dissipation, exposure to extreme temperatures, dust, splash water, shock and vibration.

Non-hardened router mounting

  Supports a variety of mounting options, including 35-mm din-rail per EN60715, floor mount, and wall mount, and offers both AC and DC power options allowing for deployment flexibility.
  The hardened router supports extended temperature ranges from –13 to 140ºF (–25 to 60ºC).
  Meets 95 percent of the Non-Condensing Humidity Requirements, IP 41 per IEC 60529 for Vertical Falling Water and Pollution 3 for Dust. The router meets MIL-STD-810, SAEJ1455, and ENG3396 for Shock and Vibe standards.

Lightweight, compact size with low power consumption

  Can be deployed in many different environments where space, heat dissipation, and low power consumption are critical factors.

Increased performance to run concurrent services

  Performance allows customers to take advantage of broadband network speeds while running highly secure, concurrent data, voice, video, and wireless services.

Enhanced security

  An integrated stateful and application inspection firewall provides network perimeter security and high-speed IP Security (IPsec); Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption offer data privacy over the Internet.
  Intrusion prevention enforces security policies in a larger enterprise or service provider network.
  Content filtering offers category-based URL classification and blocking, thus providing increased productivity and better use of company resources.
  ScanSafe web security and filtering solution requires no additional hardware or client software. Enables remote locations to intelligently redirect web traffic to the cloud to enforce granular security and acceptable use policies over user web traffic.

Multiple WAN and LAN Connections

Four-port 10/100-Mbps managed switch

  Allows for multiple Ethernet device connectivity in a small office or other remote location with the ability to designate a port as the network edge.
  VLANs allow for secure segmentation of network resources.
  Multiple LAN and WAN devices can be connected to standard 10/100 Ethernet or serial interfaces.

WAN diversity

  Multiple WAN links are supported: Gigabit Ethernet, serial, and 4G LTE provide for business continuity and WAN diversity.

Transparent Roaming Between Wireless Networks

Dual subscriber-identity-module (SIM) support

  Dual SIMs provide for high reliability and cellular multihoming support for LTE and HSPA-based networks using common FW technology within the same region (failover). North America dual SIMs provide switchover with different FW technology.(only on -GA and -MNA PIDs)

Cisco IOS Mobile IP features

  Mobile IP offers transparent roaming for mobile networks, establishing a transparent Internet connection regardless of location or movement. This enables mission-critical applications to stay connected even when roaming between networks.
  Assigned IP addresses to the home network are maintained in private or public networks.

Cisco IOS Mobile network features

  Allows an entire subnet or mobile network to maintain connectivity to the home network while roaming.

Multiple wireless WAN technologies

  Users can use the best wireless (4G LTE, 3.7G, 3.5G, or 3G) technology or network available.

Advanced IP Services in Standards-Based Cisco IOS Software

Advanced security features

  Authorization and authentication determine which individuals and devices have access to the network.
  Firewall protection provides perimeter security when using public networks.
  3DES and AES encryption provide for highly secure VPNs when transmitting and receiving data over public networks.
  Intrusion detection monitors potential malicious activity within the network.

QoS features

  Provides traffic precedence to delay-sensitive or prioritized applications.
  Facilitates low-latency routing of delay-sensitive applications such as streaming video.

IP Multicast

  Allows efficient broadcast of data or video for increased situational awareness, multiuser communications, or surveillance applications.

Management and manageability

  Network managers can remotely manage and monitor networks with SNMP, Telnet, or HTTP, and locally through a console port.
  Support for extensive 3G and 4G LTE-based MIBs allows for centralized management of remote devices and gives network managers visibility into and control over the network configuration at the remote site.
  Network managers can reset to a predesignated golden image as well as configure an ISR through Cisco IOS Software or through an external reset button.
  Network managers can upgrade 3G, 3.5G, 3.7G, and 4G LTE firmware and router configurations remotely and confirm enhancement verification.
  Tight integration with Cisco IOS Software allows you to self-monitor the functions of the 3G, 3.5G, 3.7G, and 4G LTE modems and automatically recover from a failure.
  Cisco Configuration Professional provides a web-based tool that simplifies setup and deployment.
  Intuitive network management tools such as Cisco Prime™ and HP OpenView are supported.

Cisco WAN Optimization

  Cisco WAAS Express routers and WAEs work together to optimize TCP network traffic. When client and server applications attempt to communicate with each other, the network intercepts the traffic and acts on behalf of the client application and the destination server.
  WAAS Express is supported on the Serial/Gigabit Ethernet WAN interface and up to 2 Mbps.

(C819G-4G-GA-K9)

Product Specifications

Table 2 provides 4G LTE specifications for the Cisco 819 4G LTE ISRs.

Table 2.       4G LTE Specifications

Region Theaters

 C819G-4G-GA-K9

 C819G-4G-NA-K9

 C819G-4G-VZ-K9

 C819G-4G-ST-K9

 C819G-LTE-MNA-K9

C819HG-LTE-MNA-K9

Bands

LTE bands 1, 3, 7, 8, 20

800 (band 20), 900 (band 8), 1800 (band 3), 2100 (band 1), and 2600 (band 7) MHz

LTE band 2 PCS 1900, band 4 AWS (1700/2100), band 5 (850), band 17 (700)

LTE band 4 AWS (1700/2100), band 13 (700)

LTE band 25 extended PCS 1900

LTE band 2 PCS 1900, band 4 AWS (1700/2100), band 5 (850), band 17 (700), band 13 (700), band 25 extended PCS 1900

Theoretical Download/upload speeds*

100 and 50 Mbps

100 and 50 Mbps

100 and 50 Mbps

100 and 50 Mbps

100 and 50 Mbps

Australia

ü

X

X

X

X

Europe

ü

X

X

X

X

Middle East

ü

X

X

X

X

LATAM & APAC

ü (Dependent on specific operators supporting the above LTE bands)

ü (Dependent on specific operators supporting the above LTE bands)

X

X

ü (Dependent on specific operators supporting the above LTE bands)

United States

X

ü ATT

ü Verizon

ü Sprint

ü ATT, Verizon, Sprint** (FW Image Provisioning Switching)

Canada

X

ü

X

X

ü

*   LTE CAT 3 download/upload speeds depend on specific carrier channel bandwidth and carrier LTE network provisioning.

** Sprint is currently supported only by the C819G and not C819HG.

 

 

 

Item

Specification

4G LTE modem form factor

  Embedded (included with the router)
  Upgrade FW Image Switching provisioning from flash for –GA SKU (FW-MC7304-LTE-AU or FW-MC7304-LTE-GB)
  Upgrade FW Image Switching provisioning from flash for –NA SKU (FW-MC7354-LTE-AT or FW-MC7354-LTE-CA)
  Upgrade–MNA FW Image Switching provisioning from flash (FW-MC7354M-LTE-AT or FW-MC7354-LTE-CA or FW-MC7354M-LTE-VZ or FW-MC7350-LTE-ST***)

Important 4G LTE features

  Automatic switch failover between primary and backup link
  Multichannel-interface-processor (MIP) profile configuration
  CDMA data retry
  3G MIB with 4G LTE MIB extension and traps
  Remotely initiated data callback using voice
  Remotely initiated data callback using Short Message Service (SMS)
  Remote firmware upgrade over 4G LTE
  Virtual diagnostic monitoring
  SIM lock and unlock capabilities

Dual SIM support

sim_card

  High reliability, and cellular multihoming support for dual mini SIM (2FF) card socket; compliant with ISO-7816-2 (SIM mechanical)

SMS and Global Positioning System (GPS)

sms_nav

 
  GPS antenna: SMA connector (separate active GPS with SMA antenna option)
  Send and receive SMS (maximum 160 characters)
  Standalone GPS, needs line of sight
  Configure multiple profile

MIBs

snmp_box

  Enhanced 3G MIB with 4G LTE MIB extension (4G parameters are covered with 3G MIB and 4G LTE MIB extension)
  ENTITY MIB
  IF MIB
  3G WWAN MIB persistence

4G LTE network management and diagnostics

  In-band and out-of-band management using Telnet (Cisco IOS Software command-line interface [CLI]) and SNMP, including MIB II and other extensions
  Industry-standard 4G LTE diagnostics and monitoring tools (QUALCOMM CDMA Air Interface Tester [CAIT] and Spirent Universal Diagnostic Monitor [UDM])

Modem information

  Modem form factor: Embedded Peripheral Component Interconnect (PCI) minicard
  C819G-4G-GA-K9: Sierra Wireless MC7304 with Qualcomm MDM9215
  C819G-4G-NA-K9: Sierra Wireless MC7354 with Qualcomm MDM9615
  C819G-4G-VZ-K9 and C819G-4G-ST-K9: Sierra Wireless MC7350  with Qualcomm MDM9615
  C819G-LTE-MNA-K9and C819HG-LTE-MNA-K9: Sierra Wireless MC7354 multi-carriers with Qualcomm MDM9615

Programming interfaces

  Cisco IOS Software CLI

Wireless technologies supported (performance and throughput)

C819G-4G-GA-K9

Cisco LTE 2.0 800 MHz (band 20), 900 MHz (band 8), 1800 MHz (band 3), 2100 MHz (band 1), and 2600 MHz (band 7)

Backward compatibility:

   UMTS and HSPA+: 850, 900, 1900, and 2100 MHz
   Quad-band EDGE, GPRS, and GSM: 800, 900, 1800, and 1900 MHz

C819G-4G-NA-K9

Cisco LTE 2.0 1900 MHz (band 2 PCS), 1700/2100 MHz (band 4 AWS), 850 MHz (band 5), 700 MHz (band 17)

Backward compatibility:

   UMTS and HSPA+: 850 (band 5), 900 (band 8), 1700/2100 (band 4 AWS), 1900 (band 2), and 2100 (band 1) MHz
   Quad-band EDGE, GPRS, and GSM: 800, 900, 1800 and 1900 MHz
   HSPA+ speed DL up to CAT20 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)
   DC-HSPA+ speed DL with CAT24 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)

C819G-4G-VZ-K9 and C819G-4G-ST-K9

Cisco LTE 2.0 700 MHz (band 13), 1700/2100 MHz (band 4 AWS), 1900 MHz (band 25 extended PCS)

Backward compatibility:

   EVDO Rev A/CDMA 1x BC0, BC1, BC10

C819G-LTE-MNA-K9 and C819HG-LTE-MNA-K9

Cisco LTE 2.0 1900 MHz (band 2 PCS), 1700/2100 MHz (band 4 AWS), 850 MHz (band 5), 700 MHz (band 17), 700 MHz (band 13), 1700/2100 MHz (band 4 AWS), 1900 MHz (band 25 extended PCS)

Backward compatibility:

   UMTS and HSPA+: 850 (band 5), 900 (band 8), 1700/2100 (band 4 AWS), 1900 (band 2), and 2100 (band 1) MHz
   Quad-band EDGE, GPRS, and GSM: 800, 900, 1800 and 1900 MHz
   HSPA+ speed DL up to CAT20 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)
   DC-HSPA+ speed DL with CAT24 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)
   EVDO Rev A/CDMA 1x BC0, BC1, BC10

Included antenna

  Two multiband swivel-mount dipole antennae (4G- LTE-ANTM-D) and one extender (4G-AE010-R) are included with all Cisco 819 4G LTE ISRs.

LED indicators for 4G

  Received signal strength indication (RSSI) (green)
  WWAN (green)
  SIM status (green/yellow)
  3G and 4G LTE service (green/amber)
  GPS (green/yellow)
  SYS (green/yellow)
  ACT (green/off)

Carrier support

  For an updated list of carriers that offer services on the Cisco 819 4G LTE ISR, please visithttp://www.cisco.com/go/m2m.

*** Supported only by the C819G-LTE-MNA-K9

 

Table 3 lists the software features supported on the Cisco 819 4G LTE ISRs.

Table 3.       Cisco IOS Software Features on Cisco 819 4G LTE ISRs: Advanced IP Features Set (Default)

Feature

Description

Cisco IOS Software requirement

  Cisco IOS Software feature set: Universal Cisco IOS Software image (Advanced IP Services with Full Security license)
  C819G-4G-GA-K9: Mainline Cisco IOS Software Release 15.4(3)M1 with modem firmware 5.5.26.x or later IOS release with respective modem firmware. T train Cisco IOS Software Release 15.5(2)T1 or mainline 15.5(3)M with modem firmware 5.5.58.x or later IOS release with respective modem firmware
  C819G-4G-NA-K9, C819G-4G-VZ-K9, C819G-4G-ST-K9: T train Cisco IOS Software Release 15.5(2)T1 or mainline 15.5(3)M with modem firmware 5.5.58.x or later IOS release with respective modem firmware
  C819HG-LTE-MNA-K9: Mainline Cisco IOS Software Release 15.6(2)T with modem firmware 5.5.58.x or later IOS release with respective modem firmware

IP and IP services features

  Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
  Generic routing encapsulation (GRE) and multipoint GRE (MGRE)
  Cisco Express Forwarding
  Standard 802.1d Spanning Tree Protocol
  Layer 2 Tunneling Protocol (L2TP)
  Layer 2 Tunneling Protocol Version 3 (L2TPv3)
  Network Address Translation
  Dynamic Host Configuration Protocol (DHCP) server, relay, and client
  Dynamic DNS (DDNS)
  DNS Proxy
  DNS Spoofing
  Access control lists (ACLs)
  IPv4 and IPv6 Multicast
  Open Shortest Path First (OSPF)
  Border Gateway Protocol (BGP)
  Enhanced Interior Gateway Routing Protocol (EIGRP)
  Virtual Route Forwarding (VRF) Lite
  Next Hop Resolution Protocol (NHRP)
  Bidirectional Forwarding Detection (BFD)
  Web Cache Communication Protocol (WCCP)
  Data-Link Switching (DLSW)

Switch features

  Auto Media Device In/Media Device Cross Over (MDI-MDX)
  16 802.1Q VLANs
  MAC filtering
  Switched Port Analyzer (SPAN)
  Storm control
  Smart ports
  Secure MAC address
  Internet Group Management Protocol Version 3 (IGMPv3) snooping
  802.1X

Security features

Secure Connectivity:

  Secure Sockets Layer (SSL) VPN for secure remote access
  Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
  Public-key-infrastructure (PKI) support
  20 IPsec tunnels
  Cisco Easy VPN Client and Server
  Network Address Translation (NAT) transparency
  Dynamic Multipoint VPN (DMVPN)
  Tunnel-less Group Encrypted Transport VPN
  IPsec stateful failover
  VRF-aware IPsec
  IPsec over IPv6
  Adaptive control technology
  Session Initiation Protocol (SIP) application layer gateway

Cisco IOS Firewall:

  Zone-based policy firewall
  VRF-aware stateful inspection routing firewall
  Stateful inspection transparent firewall
  Advanced application inspection and control
  Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
  Dynamic and static port security
  Firewall stateful failover
  VRF-aware firewall

Content Filtering:

  Subscription-based content filtering with Trend Micro
  Support for Websense and SmartFilter
  Cisco IOS Software blacklists and whitelists

Integrated Threat Control:

  Intrusion prevention system (IPS)
  Control Plane Policing
  Flexible Packet Matching
  Network foundation protection

QoS features

  Low Latency Queuing (LLQ)
  Weighted Fair Queuing (WFQ)
  Class-Based WFQ (CBWFQ)
  Class-Based Traffic Shaping (CBTS)
  Class-Based Traffic Policing (CBTP)
  Policy-Based Routing (PBR)
  Class-Based QoS MIB
  Class of service (CoS)-to-differentiated services code point (DSCP) mapping
  Class-Based Weighted Random Early Detection (CBWRED)
  Network-Based Application Recognition (NBAR)
  Link fragmentation and interleaving (LFI)
  Resource Reservation Protocol (RSVP)
  Real-Time Transport Protocol (RTP) header compression (cRTP)
  Differentiated Services (DiffServ)
  QoS preclassify and prefragmentation
  Hierarchical QoS (HQoS)

Management features

  Cisco Configuration Professional
  Cisco Configuration Express
  Cisco Configuration Engine support
  Cisco AutoInstall
  IP service-level agreement (IP SLA)
  Cisco IOS Embedded Event Manager (EEM)
  Cisco Prime
  Cisco Security Manager
  Telnet, SNMPv3, Secure Shell (SSH) Protocol, CLI, and HTTP management
  RADIUS and TACACS+
  Out-of-band management with external modem through virtual auxiliary port

High-availability features

  Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
  Hot Standby Router Protocol (HSRP)
  Multigroup HSRP (MHSRP)
  Dial backup with external modem through virtual auxiliary port
  Dual SIM support for cellular multihoming

Metro Ethernet features

  Ethernet operations, administration, and maintenance (OAM)
  Ethernet Local Management Interface (LMI)
  IP SLA for Ethernet

IPv6 features

  IPv6 addressing architecture
  IPv6 name resolution
  IPv6 statistics
  IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-PT)
  Internet Control Message Protocol Version 6 (ICMPv6)
  IPv6 DHCP

Number of recommended users

20

 

Table 4 lists the system specifications, and Table 5 lists antenna specifications for the Cisco 819 4G LTE ISRs.

Table 4.       System Specifications

Feature

Specification

Memory

Default and maximum DRAM

1 GB

Default and maximum flash memory

1 GB

Interface Support

Console or auxiliary port

  RJ-45: Single dual-purpose port, which provides direct connection to a console or external modem for management or backup access point

Mini-USB port (RSVD)

  Mini-USB port to support remote 4G LTE diagnostics and monitoring tools (QUALCOMM CAIT and Spirent UDM)*

WAN interfaces

  Wireless WAN with 4G LTE, 3.7G, 3.5G, and 3G speeds
  10/100/1000 Gigabit Ethernet port
  Cisco Smart Serial Interface (sync, async, and bisync)

LAN interfaces

  Four 10/100 Fast Ethernet ports

System LEDs

  System OK (green/amber)
  Activity (green)
  Speed and link for Gigabit Ethernet WAN port (green)
  Speed and link for all Fast Ethernet LAN ports (green)

Serial WAN interface

  Support for both synchronous and asynchronous modes
  Synchronous maximum speed of up to 8 Mbps
  Asynchronous maximum speed of up to 115.2 kbps
  Support for bisync modes
  Support for network clock synchronization

Serial protocol support

  EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21

Cisco Smart Serial Cabling

Cisco Smart Serial connectors and supported cables:

 

Product Number

CAB-SS-V35MT

CAB-SS-V35FC

CAB-SS-232MT

CAB-SS-232FC

CAB-SS-449MT

CAB-SS-449FC

CAB-SS-X21MT

CAB-SS-X21FC

CAB-SS-530MT

CAB-SS-530AMT

Cable Type

V.35 DTE

V.35 DCE

EIA/TIA-232 DTE

EIA/TIA-232 DCE

EIA/TIA-449 DTE

EIA/TIA-449 DCE

X.21 DTE

X.21 DCE

EIA/TIA-530 DTE

EIA/TIA-530A DTE

Length

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

Connector Type

Male

Female

Male

Female

Male

Female

Male

Female

Male

Male

Physical Characteristics

Physical dimensions

(H x W x D)

Cisco C819G-4G

1.67 x 7.7 x 7.2 in. (42 x 196 x 183 mm)

Cisco 819HG

1.73 x 7.7 x 8.1 in. (44 x 196 x 206 mm)

Weight

Cisco C819G-4G

2.3 lb (1.0 kg)

Cisco 819HG

3.2 lb (1.5 kg)

Mean time between failure 
(MTBF—Ground Benign)

  C819G-4G-GA-K9: 508,000 hours
  C819G-4G-NA-K9: 461,000 hours
  C819G-LTE-MNA-K9: 461,000 hours
  C819HG-LTE-MNA-K9: 550,000 hours

 

  C819G-4G-VZ-K9: 605,000 hours
  C819HG-4G-ST-K9: 605,000 hours

Maximum platform power consumption

Cisco C819G-4G and C819HG

11 watts

Environmental operating range

Cisco C819G-4G

-4° to 122°F (-20° to 50°C) (functional up to 55C or 131°F, non 3GPP compliant)

 

Cisco 819HG

–13 to 140°F (–25 to 60°C)

Operating altitude

50ºC up to 5000 ft

Above 5000 ft derate maximum operating temperature 1.50°C per 1000 ft

Maximum altitude: 10,000 ft

Standard safety certifications

  UL 60950-1, 2nd edition
  CAN/CSA C22.2 No. 60950-1, 2nd edition
  EN 60950-1, 2nd edition
  CB to IEC 60950-1, 2nd edition with all group differences and national deviations

EMC emissions

EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1

EMC immunity

EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386

Radio immunity

EN301 489-1, EN 301 489-7, and EN301 489-24

Cellular radio

EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24 and EN 301 908-13

Operating conditions

(Cisco 819HG only)

Noncondensing humidity: 95%

  IP 41 per IEC 60529 for Vertical Falling Water
  Pollution 3 for Dust

Operational Vibration:

  MIL-STD-810G 2.2.1 Category 4; truck transportation over U.S. highways-restrained cargo
  EN61373 functional random vibe—category 1, class B
  SAE J1455 operating random vibe cap mounted truck
  SAE J1455 Operating Sinusoidal Vibration, Category 3

Nonoperational Vibration:

  MIL-STD-810G 2.3.9 Category 20—Ground vehicles
  EN61373 simulated non-op long-life vibe—category 1, class B
  SAE J1455 Nonoperating Sinusoidal Vibration, Category 3

Operational Shock:

  MIL-STD-810G 2.2.2 Procedure 1, Functional Shock

Nonoperational Shock:

  MIL-STD-810G 2.2.2 Procedure 5, Crash Hazard
  MIL-STD-810G 2.2.2 Procedure 6, Bench Handling
  EN61373 non-op shock class B
  SAE J1455 4.11.3.1 Handling test

Power specifications

AC Power Adapter:

  Maximum power consumption: 25W
  Meets efficiency Level V
  Input voltage and currents supported: 100–264 VAC <0.5A
  Maximum output power rating: 20W
  For IP 41 - need additional enclosure

DC Power Adapter:

  Maximum power consumption: 26W
  Input voltage and currents supported: 10 VDC minimum, 13.8 VDC nominal, 36 VDC maximum operating, and 42 VDC absolute maximum
  Maximum output power rating: 20W
  IP 41 compliant
  Default: PWR2-20W-AC AC power supply

 

Table 5.       Antenna Specifications

Item

Specification

Included antenna

Two multiband 4G LTE swivel-mount dipole antennae (4G-LTE-ANTM-D) and one extender (4G-AE010-R)

Diversity (dual antennae) MIMO

 C819G-4G and C819HG: Diversity supported multiple input/multiple output (MIMO)

Antenna 4G-LTE-ANTM-O-3-X

Description:

  Multiband low profile indoor or outdoor omnidirectional antenna (IP67 ingress protection)
  Ceiling mount, dual 4G LTE and standalone GPS

Electrical Specifications:

  Frequency range: 698 to 960 MHz and 1710 to 2700 MHz
  Gain: 2.5 dBi
  Maximum power: 3W
  Connector:  SMA with TNC male adapters, and SMA for GPS
  VSWR: < 2.5:1
  Nominal impedance: 50 ohms
  Polarization: Linear vertical

Mechanical Specifications:

  Radome material: White, Black, Red, or Blue ABS, UL-94 V0
  Cable: 4 ft RG174 VW-1 compliant
  Height & Base Diameter: 90 mm and 137 mm
  Temperature rating: –40° to 185°F (–40° to 85°C)
  Mounting: 5/8 inch lug with serrated face nut (5/8 inch diameter hole through mounting surface)
  Can be used with the following cable extensions: 4G-CAB-ULL-20 and 4G-CAB-ULL-50

Antenna 4G-ANTM-OM-CM

Description:

  Multiband indoor omnidirectional antenna
  Ceiling mount

Electrical Specifications:

  Frequency range: 698 to 960 MHz, 1575 MHz, and 1710 to 2690 MHz
  Gain: 1 and 1.5 decibels relative to isotropic (dBi) (700 to 960 MHz), 1.7 and 3.2 dBi (1700 to 2200 MHz), 3 and 4 dBi (2500 to 2700 MHz)
  Maximum power: 50W
  Connector: TNC male
  VSWR: 2.0:1 and 3.01:1 or less for GPS
  Nominal impedance: 50 ohms
  Polarization: Linear vertical

Mechanical Specifications:

  Radome material: White ABS
  Dimensions (outside dimensions x height): 5.64 in. x 2.0 in. (143.3 X 50.8 mm)
  Weight: 6.0 oz (170.1 g
  Temperature rating: –40° to 185°F (–40° to 85°C)
  Can be used with the following cable extensions: 3G-CAB-ULL-20 and 3G-CAB-ULL-50

Antenna 4G- LTE-ANTM-D

Description:

  Cisco 4G LTE and 3G omnidirectional dipole antenna
  Articulating joint; can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees
  Plug threaded TNC connector: Directly mount the antenna on any Cisco 4G LTE or Cisco 3G wireless ISR enhanced high-speed WAN interface card (EHWIC) with a TNC connector; the threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification
  Multiband swivel-mount dipole antenna
  Faceplate mount (dual units included with all Cisco 4G LTE WWAN)

Electrical Specifications:

  Operating frequency ranges: 698 to 806 MHz, 824 to 894 MHz, 925 to 960 MHz, 1710 to 1885 MHz, 1920 to 1980 MHz, 2110 to 2170 MHz, and 2500 to 2690 MHz
  Maximum peak gain: 2 dBi
  Maximum input power: 3W
  Connector: TNC plug
  Voltage standing wave ratio (VSWR): < 2.5:1 or less
  Characteristic impedance: 50 ohms

Mechanical Specifications:

  Antenna dimensions (L x W x D): 9 x 1.2 x 7/16 in. (229 x 30.5 x 11 mm)
  Temperature rating: –22° to 158°F (–30° to 70°C)
  Antenna base and random color: Cisco Raven Black

Antenna extension 4G-AE015-R

Description:

  Single-unit antenna extension base (15 ft [457.2 cm])

Electrical Specifications:

  Frequency range: 6 GHz
  Attenuation: Less than 3 dB at or below 2.5 GHz
  Base connector: TNC socket
  Pigtail connector: TNC plug

Mechanical Specifications:

  Base material: Cisco gray UL94 V0 PC/ABS plastic
  Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
  Weight: 6 oz (0.17 kg)
  Cable: 15 ft (457.2 cm) nonplenum rated Pro-Flex Plus 195

Antenna extension 4G-AE010-R

Description:

  Single-unit antenna extension base (10 ft [304.8 cm], one cable included)

Electrical Specifications:

  Frequency range: 6 GHz
  Attenuation: Less than 3 dB at or below 2.5 GHz
  Base connector: TNC socket
  Pigtail connector: TNC plug

Mechanical Specifications:

  Base material: UL 94 V0PC and ABS plastic
  Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
  Weight: 6 oz (0.17 kg)
  Cable: 10 ft (304.8 cm) nonplenum rated Pro-Flex Plus 195

ANT-4G-OMNI-OUT-N

Description: Cisco outdoor omnidirectional antenna for 2G, 3G, and 4G LTE cellular

  UV-stable radome
  Mast-mounting bracket
  Applicable for both 2G and 3G solutions
  Domestic LTE 700 band and global LTE 2600 band
  Domestic cellular and global GSM
  WiMAX 2300 and 2500

Electrical Specifications:

  Frequency ranges: 698 to 960 MHz, 1710 to 2170 MHz, and 2300 to 2700 MHz
  Nominal gain (dBi): 698 to 960 MHz = 1.5 dBi, and 1710 to 2700 MHz = 3.5 dBi
  3 dB beam width (E plane): 698 to 960 MHz = 81 degrees, 1710 to 2170 MHz = 75 degrees, and 2300 to 2700 MHz = 100 degrees
  3 dB beam width (H plane): 360 degrees, omnidirectional
  Polarization: Vertical and linear
  Normal impedance: 50 ohms
  VSWR: < 2.5:1 (698 to 960 MHz) and < 2.0:1 (1710 to 2690 MHz)
  Radiation pattern: Omnidirectional

Mechanical Specifications:

  Mount style: Mast mount, upright position only
  Environment: Outdoor
  Connector: N-type socket
  Antenna length (height): 9.8 x 1 in. (24.9 x 2.45 cm)
  Weight: 1.5 lb (0.68 kg)
  Dimensions (H x Outside dimensions): 9.8 x 1 in. (248 x 24.5 mm)
  Operating temperature range: –22° to 158°F (–30° to 70°C)
  Storage temperature: –40° to 185°F (–40° to 85°C)
  Maximum power: 20W
  Radome: Polycarbonate, UV, white
  Material substance compliance: ROHS compliant

ANT-4G-SR-OUT-TNC

Description: Cisco integrated 4G LTE low-profile outdoor saucer antenna:

  Applicable for both 3G and 4G LTE solutions
  Domestic LTE 700 band and global LTE 2600 band
  Domestic cellular and global GSM
  Weatherproof UV stable radome
  Performance optimized
  Excellent flame rating

Electrical Specifications:

  Frequency ranges: 698 to 960 MHz and 1710 to 2700 MHz
  Peak gain with 1-ft cable: 1.5 dBi (698 to 960 MHz) and 3.7 dBi (1710 to 2700 MHz)
  Peak gain with 15-ft cable: 0.8 dBi (698 to 960 MHz) and 0.2 dBi (1710 to 2700 MHz)
  Average efficiency with 1-ft cable: 90% (698 to 960 MHz) and 82% (1710 to 2700 MHz)
  Average efficiency with 15-ft cable: 60% (698 to 960 MHz) and 40% (1710 to 2700 MHz)
  Polarization: Linear and vertical
  Nominal impedance: 50 ohms
  VSWR (maximum): 2.0:1 (698 to 960 MHz) and 2.0:1 (1710 to 2700 MHz)
  H-plane (3-dB beam width): Omnidirectional

Mechanical Specifications:

  Power: 3W
  Cable: 15-ft LMR 195
  RF connector: Type N (f); TNC (plug) available
  Mount style: Ceiling mount
  Radome: PC/ABS, UV stable, black
  Material substance compliance: RoHS compliant
  Operational temperature: –22° to 158°F (–30° to 70°C)
  Storage temperature: –40° to 185°F (–40° to 85°C)
  Environment: Indoor
  Dimensions (H x Outside dimensions): 3.4 x 7.9 in. (87 x 200 mm)

ANT-4G-PNL-OUT-N

Description: Cisco multiband panel outdoor 4G LTE antenna:

  Supports 3G and 4G LTE solutions
  Supports bands
  Wall-mount and mast-mount
  Indoor and outdoor
  Dual type-N socket connector

Electrical Specifications:

  Frequency Ranges: 698 to 960 MHz and 1710 to 2700 MHz
  VSWR: 2.0:1 maximum
  Gain: 5.5 to 10.5 dBi (698 to 960 MHz) and 6.5 to 9.0 dBi (1710 to 2700 MHz)
  3-dB beam width (vertical plane): 55 to 70 degrees = 698 to 960 MHz, 53 to 98 degrees = 1710 to 2200 MHz, 60 to 70 degrees = 2200 to 2500 MHz, and 55 to 70 degrees = 2500 to 2700 MHz
  3-dB beam width (horizontal plane): 55 to 70 degrees = 698 to 960 MHz and 50 to 90 degrees = 1710 to 2200 MHz
  F/B ratio: > 15 dB, typical 20 dB = 698 to 960 MHz, and > 17 dB, typical 23 dB = 1700 to 2700 MHz
  Isolation: > 30 dB
  Polarization: Slant +/– 45 degrees
  Nominal impedance: 50 ohms
  Radiation pattern: Directional

 

Mechanical Specifications: Mount style: Wall or mast mount

  Environment: Outdoor
  Connector: Dual type-N socket (direct connect or dual 12 in. [30 cm])
  Antenna length (height): 11.6 in. (2.95 cm)
  Temperature range (operating): –22° to 158°F (–30° to 70°C)
  Storage temperature: –40° to 185°F (–40° to 85°C)
  Wind rating: 160 km per hr
  IP rating: IP 54
  Radome: Polycarbonate, UV resistant, white

Material substance compliance: ROHS compliant

CGR-LA-NM-NF*

CGR-LA-NF-NF*

Description: Cisco Lightning Arrestor

  Broadband operation
  DC continuity for outdoor powering
  Reversed installation

Permanently installed gas capsule

Feature Description

  Arrestor Type: Gas discharge tube
  Main path connectors: Port 1: protected, N plug (male), Port 2: unprotected, N jack (female, bulkhead side)
  Impedance: 50 ohms
  Frequency range: 0 MHz to 5800 MHz
  Return loss: Greater than or equal to 20 dB
  Insertion loss: Less than or equal to 0.2 dB
  RF CW power: Less than or equal to 60W
  Surge current handling capability: 10 single, multiple kA (test pulse 8/20 ms)
  Residual pulse energy: 250 microsecond typically (test pulse 4 kV 1.2/50 microsecond; 2kA 8/20 microsecond), main path (protected side)
  Operating temperature range: -40°F to 185°F (-40°C to 85°C)
  Waterproof rating: IP 67 (according to IEC 60529, data refer to the coupled state)
  Mounting and grounding: MH24 (bulkhead)
  Material
   Housing: brass
   Port 1 center contact: gold-plated brass
   Port 2 center contract: copper beryllium alloy

* –N antenna works with –N cables and –N lighting arrestor

SKU C819G-4G-GA-K9
Barcode # 882658702976
Brand Cisco
Shipping Weight 2.4600kg

Be The First To Review This Product!

Help other Device Deal users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought


More From This Category