The Cisco® 880G and 890G Series 4G LTE 2.0 Integrated Services Routers with Cisco IOS® Software offer support for integrated fourth-generation (4G LTE) wireless WAN (mobile broadband backhaul), WLAN capabilities (C897VAGW Model) and cutting-edge capabilities. The Cisco 880G and 890G Series ISRs provide a rapidly deployable, highly available, reliable, and secure solution designed to combine Internet access, comprehensive security, and wireless services in a single device that is easy to deploy and manage for primary or backup connectivity (Figure 1). Customers that would benefit from these routers include small businesses, remote small or medium-sized or power branches, financial services firms, healthcare organizations, pop-up stores, point-of-sale systems, and retail businesses. Fully integrated with Cisco IOS Software, the Cisco 880G and 890G routers deliver enterprise-class features, including highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. The best-in-class Cisco 880G and 890G Series architecture is specifically designed to deliver high performance with concurrent services, business continuity, and investment protection. The Cisco 880G and 890G 4G LTE 2.0 series are the industry leader to bring enterprise grade wireline like functionality such as Quality of Service (QoS) for cellular, Multi-Virtual Route Forwarding (Multi-VRF), advanced VPN, and Unified Communications solutions over LTE.

 

Figure 1.      Cisco C899G-LTE Integrated Services Router

 

The Cisco® 880G and 890G Series LTE 2.0 routers also provide the ability to extend Cisco product-based networks to remote power branch offices with a relatively low incremental investment, as well as to enable managed services offerings based on end-to-end Cisco system architecture.

Product Overview

The Cisco 880G and 890G Series 4G LTE 2.0 ISRs are fixed-configuration routers that provide collaborative business solutions for secure voice and data communications to enterprise small branch offices, with support for the latest Third-Generation Partnership Project (3GPP) Release 9 standards for 4G LTE. They provide persistent, reliable LTE connectivity with fallback and transparent handoff to earlier technologies. The routers are designed to deliver secure broadband, Metro Ethernet or any xDSL variants, wireless WAN (WWAN) connectivity, and business continuity. Additionally, the Cisco 897VAGW ISR supports enterprise class built-in Wireless LAN (WLAN) capability They also come with powerful management tools, such as the web-based Cisco Configuration Professional configuration management tool, which simplifies setup and deployment.

   Cisco 4G LTE 2.0: Multimode LTE 2.0 for carriers that operate LTE 800-MHz (band 20), 900-MHz (band 8), 1800-MHz (band 3), 2100-MHz (band 1), or 2600-MHz (band 7) networks; the multimode 880G and 890G Series 4G LTE 2.0 routers are backward-compatible with Universal Mobile Telecommunications Service (UMTS) and High-Speed Packet Access Plus (HSPA+): 850 MHz (band 5) , 900 MHz (band 8), 1900 MHz (band 2), and 2100 MHz (band 1)

   C899G-LTE-NA-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 700 MHz (band 17), 1900 MHz (band 2 PCS), 850 MHz (band 5) or 1700/2100 MHz (band 4 AWS) networks; backward-compatible with UMTS and HSPA+: 850 MHz (band 5), 900 MHz (band 8), 1900 MHz (band 2 PCS), and 1700/2100 MHz (band 4 AWS).

   C899G-LTE-VZ-K9 and C899G-LTE-ST-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 700 MHz (band 13), 1700/2100 MHz (band 4 AWS), or 1900 MHz (band 25 extended PCS) networks; backward-compatible with EVDO Rev A/CDMA 1x BC0, BC1, BC10.

   C899G-LTE-JP-K9: Multimode Cisco LTE 2.0 for carriers that operate LTE 800 MHz (band 19), 1500 MHz (band 21), and 2100 MHz (band 1) networks; backward-compatible with UMTS and HSPA+: 850 MHz (band 5), 800 MHz (band 6), 800 MHz (band 19), and 2100 MHz (band 1).

 

The Cisco 880G and 890G Series 4G LTE 2.0 ISRs provide a broad range of enterprise-class features, including:

   Security services, such as firewall, intrusion prevention, VPN, and Cisco ISR Web Security with Cisco ScanSafe, which require no additional hardware or client software, This enables branch offices, manufacturing sites, hospitals, banks, and mobile fleets, for example, to intelligently redirect web traffic to the cloud to enforce granular security and acceptable use policies over user web traffic. With this solution, you can deploy market-leading web security quickly and easily to protect branch-office users from web-based threats, such as viruses, while saving bandwidth, money, and resources.

   Additional WAN options, such as Gigabit Ethernet WAN interfaces and an 8-port 10/100/1000 Gigabit Ethernet managed switch for LAN connectivity. The Cisco 880G and 890G Series ISRs provide quality-of-service (QoS) features for optimizing voice and video applications.

   Cisco Configuration Professional, a web-based configuration tool that simplifies setup and deployment. Centralized management capabilities give network managers visibility into and control over the network configurations at remote sites.

   WWAN services, offering enhanced data rates and improved latency (30 ms or less)—an ideal way to supplement traditional wireline services. The 4G LTE WWAN data services offered today have average data rates well in excess of ISDN speeds, with theoretical limits of 100 Mbps on the downlink and 50 Mbps on the uplink. The actual data speed depends on the service provider’s network. With 4G LTE data rates, the Cisco 4G LTE 2.0 WWAN offers a primary WAN link solution capable of running comprehensive branch-office services, including voice and video services. The 4G LTE WWAN data services can also be used as a cost-effective alternative in areas where broadband services are either not available or very expensive. Cisco is building on these performance milestones and adding support for wireless to our wide variety of WAN interface alternatives.

 

Business Benefits and Application Examples

Businesses are looking for ways to reduce costs, increase revenue, and improve business continuity. The 4G LTE wireless connectivity, which is 10 to 15 times faster and has 5 times lower latency than 3G links, allows a small enterprise branch office or remote office to set up comprehensive media services in a matter of hours, without worrying about availability of broadband services or the need to lay down the lines. Wireless carriers offer flexible, usage-based data plans that can be customized to meet the needs and price points of the business customer. As WAN backup alternatives, 3G and 4G LTE wireless offer greater WAN diversity and resiliency because they are independent of the local terrestrial infrastructure. The Cisco 880G and 890G help businesses stay productive during service provider downtime or a network failure with Cisco Intelligent WAN diversity and Cisco Application Visibility & Control (IWAN & AVC LTE support with C890 series). The 802.11a/b/g/n 2X3 MIMO built-in Cisco 3500 Access Point (AP) in the Cisco 897VAGW, comes with Cisco’s CleanAir technology, to create a self-healing, self-optimizing WLAN. Moreover, with the advantage of dual radio, the integrated AP can serve both as an access point and as a client to a wireless mesh network. This provides another source for WAN diversity along with Gigabit Ethernet, xDSL, and LTE cellular. The AP ClientLink feature improves reliability and coverage for legacy devices and dynamic frequency selection (DFS allows detecting and avoiding interference with radar signals to comply with regulatory domains. Cisco 897VAGW ISR with integrated 4G LTE and 802.11 a/b/g/n AP. The dual radio WLAN on the 897VAGW can serve as both a client and an access-point. More information on the Cisco 3500 Access Point is available at https://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10981/data_sheet_c78-594630.html

Ability to Host Networks in Motion

The Cisco 880G and 890G use standards-based mobile IP features in Cisco IOS Software to host networks in motion. Transitions to different wireless networks are transparent to the users and devices (such as laptops, smart devices, and surveillance cameras), and applications maintain continuous connectivity without the user’s manual intervention as WAN links change. In addition to allowing a single node or device to stay connected, the Cisco 880G and 890G allow an entire mobile network or subnet to stay connected.

Retail VPN

Retail stores migrating from dialup connections for point-of-sale transactions can use the 4G LTE WWAN option on the Cisco 880G or 890G for low-cost broadband access, with the security required to comply with payment card industry (PCI) and other data security requirements. Multiple devices and applications can then be added to the store network to take advantage of the increased bandwidth and to enable secure mobility and enhance productivity.

Managed Services

Service providers and value-added resellers (VARs) can use the Cisco 880G or 890G as a platform to offer differentiated business-class security and wireless LAN (WLAN) services for small and medium-sized business (SMB) customers. Superior management capabilities, such as Simple Network Management Protocol (SNMP) support for 3G MIB with 4G MIB extension and Cisco Configuration Professional, make remote management and provisioning easier.

   Multiple-PDN: This feature allows configuration of multiple active (Access Point Name) APN so that Internet traffic can be kept separate from the corporate traffic.

   4G LTE multiple-bearer QoS for cellular: The Cisco 880G and 890G 4G LTE 2.0 supports 4G LTE multiple-bearer QoS. Detailed information on the bearer is part of show CLI, SNMP-MIBs etc. The QoS feature is service provider (SP) dependent, and requires SP to launch this service.

   Multi-VRF for cellular: 4G LTE 2.0 now support Multi-VRF for cellular network. Multi-VRF is a Cisco proprietary implementation over and above the 3GPP spec and requires Cisco ASR5K Packet Gateway (P-GW) as the head-end at the service provider’s network. The Multi-VRF feature is service provider (SP) dependent, and requires SP to launch this service.

   Enterprise grade Unified Communication solutions over LTE:  The Cisco 880G and 890G 4G LTE 2.0 supports voice and video and can be integrated with Cisco Unified Communications cloud or premises-based infrastructure.

   Public Land Mobile Network (PLMN Search):  UE presents end user with available PLMN search manuallyUE can optimize PLMN search procedure using stored information such as RF carriers and cell parameters.

 

 

 

Primary Features and Benefits

Table 1.       Features and Benefits of the Cisco 880G and 890G Series 4G LTE 2.0 ISRs

Feature

Benefits

Smallest Cisco ISR in Nonhardened Form Factors

Lightweight, compact size with low power consumption

  Can be deployed in many different environments where space, heat dissipation, and low power consumption are critical factors.

Increased performance to run concurrent services

  Performance allows customers to take advantage of broadband network speeds while running secure, concurrent data, voice, video, and wireless services.

Enhanced security

  An integrated stateful and application inspection firewall provides network perimeter security and high-speed IP Security (IPsec); Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption offer data privacy over the Internet.
  Intrusion prevention enforces security policies in a larger enterprise or service provider network.
  Content filtering offers category-based URL classification and blocking, thus helping increase productivity and providing better use of company resources.
  ScanSafe web security and filtering solution requires no additional hardware or client software. Enables remote locations to intelligently redirect web traffic to the cloud to enforce granular security and acceptable use policies over user web traffic.

Multiple WAN and LAN Connections

4-port 10/100-Mbps or 8-port 10/100/1000-Mbps managed switch

  Allows connectivity for multiple Ethernet devices in a small office or other remote location with the ability to designate a port as the network edge.
  VLANs allow for secure segmentation of network resources.
  Multiple LAN and WAN devices can be connected to standard Fast Ethernet or Gigabit Ethernet.

WAN diversity

  Multiple WAN links are supported: Gigabit Ethernet (copper or SFP option), any xDSL variants, and 4G LTE provide for business continuity and WAN diversity.

Integrated WLAN Access Point

  Integrates the Cisco 3500 802.11 a/b/g/n Access Point for mission-critical applications. By intelligently avoiding interference, the WLAN feature offers performance protection for 802.11n networks to help ensure reliable application delivery. The 2X3 MIMO AP comes with Cisco’s CleanAir technology, the industry’s first to create a self-healing, self-optimizing wireless network.
  With dual radios, the Cisco AP can serve both as an access point and as a client to a wireless mesh network concurrently, providing another source for WAN diversity.
  The AP ClientLink feature improves reliability and coverage for legacy devices
  Dynamic frequency selection (DFS) allows detecting and avoiding interference with radar signals to comply with regulatory domains. More information on the Cisco 3500 AP is available at:https://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10981/data_sheet_c78-594630.html

Transparent Roaming Between Wireless Networks

Dual subscriber-identity-module (SIM) support

  Dual SIM provides for high reliability and cellular multihoming support for LTE and HSPA-based networks using common firmware and technology within the same region (only on all -GA and C899G-LTE-JP-K9 PIDs)

Cisco IOS Mobile IP features

  Mobile IP offers transparent roaming for mobile networks, establishing a transparent Internet connection regardless of location or movement. This enables mission-critical applications to stay connected even when roaming between networks.
  Assigned IP addresses to the home network are maintained in private or public networks.

Cisco IOS Mobile network features

  Allows an entire subnet or mobile network to maintain connectivity to the home network while roaming.

Multiple wireless WAN technologies

  Users can use the best wireless (4G LTE, 3.7G, 3.5G, or 3G) technology or network available.

Advanced IP Services in Standards-Based Cisco IOS Software

Advanced security features

  Authorization and authentication determines which individuals and devices have access to the network.
  Firewall protection provides perimeter security when using public networks.
  3DES and AES encryption provide for highly secure VPNs when transmitting and receiving data over public networks.
  Intrusion detection monitors potential malicious activity within the network.

QoS features

  Provides traffic precedence to delay-sensitive or prioritized applications.
  Facilitates low-latency routing of delay-sensitive applications such as streaming video.

IP Multicast

  Allows efficient broadcast of data or video for increased situational awareness, multiuser communications, or surveillance applications.

Management and manageability

  Network managers can remotely manage and monitor networks with SNMP, Telnet, or HTTP, and locally through a console port.
  Support for extensive 3G- and 4G LTE-based MIBs allows for centralized management of remote devices and gives network managers visibility into and control over the network configurations at the remote site.
  Network managers can reset to a predesignated golden image as well as configure an ISR through Cisco IOS Software or through an external reset button.
  Network managers can upgrade 3G, 3.5G, 3.7G, and 4G LTE firmware and router configurations remotely and confirm enhancement verification.
  Tight integration with Cisco IOS Software allows you to self-monitor the functions of the 3G, 3.5G, 3.7G, and 4G LTE modems and automatically recover from a failure.
  Cisco Configuration Professional provides a web-based tool that simplifies setup and deployment.
  Intuitive network management tools such as Cisco Prime™ and HP OpenView are supported.
  IOx support with 3rd party Cisco certify APP running on 2nd core.

(C887VAG-4G-GA-K9)

 Cisco 4G LTE 2.0 Specifications for the Cisco 880G and 890G Series 4G LTE 2.0 ISRs

Item

Specification

4G LTE modem form factor

  Embedded (included with the router)
  Upgrade FW Image Switching provisioning from (–GA SKUs) flash (FW-MC7304-LTE-AU or FW-MC7304-LTE-GB)
  Upgrade FW Image Switching provisioning from (–NA SKU) flash (FW-MC7354-LTE-AT or FW-MC7354-LTE-CA)

Important 4G LTE features

  Automatic switch failover between primary and backup link
  Multichannel-interface-processor (MIP) profile configuration
  CDMA data retry
  3G MIB with 4G LTE MIB extension and traps
  Remotely initiated data callback using voice
  Remotely initiated data callback using Short Message Service (SMS)
  Remote firmware upgrade over 4G LTE
  Virtual diagnostic monitoring
  SIM lock and unlock capabilities

Dual SIM support

  High reliability, and cellular multihoming support for dual mini (2FF) SIM card socket; compliant with ISO-7816-2 (SIM mechanical)

SMS and Global Positioning System (GPS)

  GPS antenna: SMA connector (separate active GPS with SMA antenna option)
  Send and receive SMS (maximum 160 characters)
  Standalone GPS, needs line of sight
  Configure multiple profile

MIBs

  Enhanced 3G MIB with 4G MIB extension (4G parameters are covered with 3G MIB and 3G MIB extension)
  ENTITY MIB
  IF MIB
  3G WWAN MIB persistence

4G LTE network management and diagnostics

  In-band and out-of-band management using Telnet (Cisco IOS Software command-line interface [CLI]) and SNMP, including MIB II and other extensions
  Industry-standard 4G LTE diagnostics and monitoring tools (Qualcomm CDMA Air Interface Tester [CAIT] and Spirent Universal Diagnostic Monitor [UDM])

Modem information

  Modem form factor: Embedded Peripheral Component Interconnect (PCI) minicard
  C88xG-4G-GA-K9 and C89xG(W)-LTE-GA-K9: Sierra Wireless MC7304 with Qualcomm MDM9215
  C899G-LTE-NA-K9: Sierra Wireless MC7354 with Qualcomm MDM9615
  C899G-LTE-VZ-K9 and C899G-LTE-ST-K9: Sierra Wireless MC7350 with Qualcomm MDM9615
  C899G-LTE-JP-K9: Sierra Wireless MC7330 with Qualcomm MDM9215

Programming interfaces

  Cisco IOS Software CLI

Wireless technologies supported (performance and throughput)

C88xG-4G-GA-K9 and C89xG(W)-LTE-GA-K9

Cisco LTE 2.0 800 MHz (band 20), 900 MHz (band 8), 1800 MHz (band 3), 2100 MHz (band 1), and 2600 MHz (band 7)

Backward compatibility:

  UMTS and HSPA+: 850, 900, 1900, and 2100 MHz
  Quad-band EDGE, GPRS, and GSM: 800, 900, 1800, and 1900 MHz
  HSPA+ speed DL up to CAT20 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)
  DC-HSPA+ speed DL with CAT24 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)

C899G-LTE-NA-K9

Cisco LTE 2.0 1900 MHz (band 2 PCS), 1700/2100 MHz (band 4 AWS), 850 MHz (band 5), and 700 MHz (band 17)

Backward compatibility:

  UMTS and HSPA+: 850 (band 5), 900 (band 8), 1700/2100 (band 4 AWS), 1900 (band 2), and 2100 (band 1) MHz
  Quad-band EDGE, GPRS, and GSM: 800, 900, 1800 and 1900 MHz
  HSPA+ speed DL up to CAT20 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)
  DC-HSPA+ speed DL with CAT24 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)

C899G-LTE-JP-K9

Cisco LTE 2.0 2100 MHz (band 1), 800 MHz (band 19), and 1500 MHz (band 21)

Backward compatibility:

  UMTS and HSPA+: 850 (band 5), 800 (band 6), 800 (band 19), and 2100 (band 1) MHz
  Quad-band EDGE, GPRS, and GSM: 800, 900, 1800 and 1900 MHz
  HSPA+ speed DL up to CAT20 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)
  DC-HSPA+ speed DL with CAT24 (42.2 Mbps) and UL up to CAT6 (5.76 Mbps)

C899G-LTE-VZ-K9 and C899G-LTE-ST-K9

Cisco LTE 2.0 700 MHz (band 13), 1700/2100 MHz (band 4 AWS), and 1900 MHz (band 25 extended PCS)

Backward compatibility:

EVDO Rev A/CDMA 1x BC0, BC1, BC10

Included antenna

  Two multiband swivel-mount dipole antennae (4G- LTE-ANTM-D) and one extender (4G-AE010-R) are included with all Cisco 880G and 890G Series 4G LTE 2.0 routers.

LED indicators for 4G

  Received signal strength indication bar (RSSI) (green)
  WWAN (green)
  SIM status (green/yellow)
  3G and 4G LTE service (green)
  GPS (green/yellow)

Carrier support

  For an updated list of carriers that offer services on the Cisco 880G and 890G 4G LTE 2.0 Series, please visithttps://www.cisco.com/c/en/us/products/routers/networking_solutions_products_genericcontent0900aecd80601f7e.html#~north-america

 

Table 6.       Cisco IOS Software Features: Advanced IP Services Features Set (default) on the Cisco 880G and 890G Series 4G LTE 2.0 ISRs

Feature

Description

Cisco IOS Software requirement

  Cisco IOS Software feature set: Universal Cisco IOS Software image (Advanced IP Services with Full Security License)
  C88xG-4G-GA-K9 and C89xG(W)-LTE-GA-K9: Mainline Cisco IOS Software Release 15.4(3)M1 with modem firmware 5.5.26.x or later IOS release with respective modem firmware. T train Cisco IOS Software Release 15.5(1)T with modem firmware 5.5.58.x or later IOS release with respective modem firmware for Advanced LTE features support C886VAG-LTE-GA-K9 and C897VAGW-LTE-GA-K9 T train Cisco IOS Software Release 15.6(2)T with modem firmware 5.5.58.x or later IOS release with respective modem firmware.
  C899G-LTE-NA-K9, C899G-LTE-VZ-K9, C899G-LTE-ST-K9: Mainline Cisco IOS Software Release 15.5(1)T1 with modem firmware 5.5.58.x or later IOS release with respective modem firmware
  C899G-LTE-JP-K9: Cisco IOS Software Release 15.6(1)T with modem firmware 5.5.58.x or later IOS release with respective modem firmware

 

Table 7.       System Specifications for the Cisco 880G and 890G Series 4G LTE 2.0 ISRs

Feature

Specification

Memory

Default and maximum DRAM

1 GB

Default and maximum flash memory

1 GB

Interface Support

Console or auxiliary port

  RJ-45: Single dual-purpose port, which provides direct connection to a console or external modem for management or backup access point

Mini-USB port (reserved)

  Mini-USB port to support remote 4G LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM)

WAN interfaces

  Wireless WAN with 4G LTE, 3.7G, 3.5G, and 3G speeds

LAN interfaces

  Four 10/100 Fast Ethernet ports on the Cisco 880G and eight 10/100/1000 Gigabit Ethernet ports on the Cisco 890G

WLAN Features

  2x3 multiple-input multiple-output (MIMO) with two spatial streams (embedded antennas)
  Maximal ratio combining (MRC)
  Legacy beamforming
  20- and 40-MHz channels
  PHY data rates up to 300 Mbps
  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  802.11 dynamic frequency selection (DFS)
  Cyclic shift diversity (CSD) support

LEDs

  WWAN (green/amber)
  SIM status (green/amber)
  Received signal strength indication (RSSI) bar (green)
  3G/4G LTE service (green/amber)
  GPS (green/amber)
  Speed and link for Gigabit Ethernet WAN port (green)
  Speed and link for all Fast Ethernet LAN ports (green)

Physical Characteristics

Physical dimensions

(H x W x D)

Cisco C880G-4G

  1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet and antenna TNC/SMA connectors)
  1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet and antenna TNC/SMA connectors)

 

Cisco C890G(W)-LTE

  1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet and antenna TNC/SMA connectors)
  1.75 x 12.8 x 10.4 in. (44 x 325 x 264mm) (without rubber feet and antenna TNC/SMA connectors)

Weight

Cisco C880G-4G

  5.6 lb (2.54 kg)

 

Cisco C890G-LTE

  5.7 lb (2.59 kg)

 

Cisco C897VAGW-LTE

  6.1 lb (2.76 kg)

Standard safety certifications

  UL 60950-1, 2nd edition
  CAN/CSA C22.2 No. 60950-1, 2nd edition
  EN 60950-1, 2nd edition
  CB to IEC 60950-1, 2nd edition with all group differences and national deviations

EMC emissions

EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1

EMC immunity

EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386

Radio immunity

EN301 489-1, EN 301 489-7, and EN301 489-24

Cellular radio

EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24, and EN 301 908-13

 

Table 8.       Antenna Specifications

Item

Specification

Included antenna

Two multiband 4G LTE swivel-mount dipole antennae (4G-LTE-ANTM-D) and one extender (4G-AE010-R) are included.

Diversity (dual antennae) MIMO

 C88xG-4G-GA-K9, C89xG(W)-LTE-GA-K9 and C899G-LTE-xx-K9: Diversity supported MIMO (2X2)

Antenna 4G-ANTM-OM-CM

Description:

  Multiband indoor omnidirectional antenna
  Ceiling mount

Electrical specifications:

  Frequency range: 698 to 960 MHz, 1575 MHz, and 1710 to 2690 MHz
  Gain: 1 and 1.5 decibels relative to isotropic (dBi) (700 to 960 MHz), 1.7 and 3.2 dBi (1700 to 2200 MHz), 3 and 4 dBi (2500 to 2700 MHz)
  Maximum power: 50W
  Connector: TNC male
  Voltage standing wave ratio (VSWR): 2.0:1 and 3.01:1 or less for GPS
  Nominal impedance: 50 ohms
  Polarization: Linear vertical

Mechanical specifications:

  Radome material: White ABS
  Dimensions (outside dimensions x height): 5.64 in. x 2.0 in. (143.3 X 50.8 mm)
  Weight: 6.0 oz (0.17 kg)
  Temperature rating: –40° to 185°F (–40° to 85°C)
  Can be used with the following cable extensions: 3G-CAB-ULL-20 and 3G-CAB-ULL-50

Antenna 4G- LTE-ANTM-D

Description:

  Cisco 4G LTE and 3G omnidirectional dipole antenna
  Articulating joint; can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees
  Plug threaded TNC connector: Directly mount the antenna on any Cisco 4G LTE or Cisco 3G wireless ISR enhanced high-speed WAN interface card (EHWIC) with a TNC connector; the threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification
  Multiband swivel-mount dipole antenna
  Faceplate mount (dual units included with all Cisco 4G LTE WWAN)

Electrical specifications:

  Operating frequency ranges: 698 to 806 MHz, 824 to 894 MHz, 925 to 960 MHz, 1710 to 1885 MHz, 1920 to 1980 MHz, 2110 to 2170 MHz, and 2500 to 2690 MHz
  Maximum peak gain: 2 dBi
  Maximum input power: 3W
  Connector: TNC plug
  VSWR: < 2.5:1 or less
  Characteristic impedance: 50 ohms

Mechanical specifications:

  Antenna dimensions (L x W x D): 9 x 1.2 x 7/16 in. (229 x 30.5 x 11 mm)
  Temperature rating: –22° to 158°F (–30° to 70°C)
  Antenna base and random color: Cisco Raven Black

Antenna extension 4G-AE015-R

Description:

  Single-unit antenna extension base (15 ft [457.2 cm])

Electrical specifications:

  Frequency range: 6 GHz
  Attenuation: Less than 3 dB at or below 2.5 GHz
  Base connector: TNC socket
  Pigtail connector: TNC plug

Mechanical specifications:

  Base material: Cisco gray UL94 V0 PC/ABS plastic
  Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
  Weight: 6 oz (0.17 kg)
  Cable: 15 ft (457.2 cm) nonplenum rated Pro-Flex Plus 195

Antenna extension 4G-AE010-R

Description:

  Single-unit antenna extension base (one 10-ft [304.8 cm] cable included)

Electrical specifications:

  Frequency range: 6 GHz
  Attenuation: Less than 3 dB at or below 2.5 GHz
  Base connector: TNC socket
  Pigtail connector: TNC plug

Mechanical specifications:

  Base material: UL 94 V0PC and ABS plastic
  Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
  Weight: 6 oz (0.17 kg)
  Cable: 10 ft (304.8 cm) nonplenum rated Pro-Flex Plus 195

ANT-4G-OMNI-OUT-N

Description: Cisco outdoor omnidirectional antenna for 2G, 3G, and 4G LTE cellular:

  UV-stable radome
  Mast-mounting bracket
  Applicable for both 2G and 3G solutions
  Domestic LTE 700 band and global LTE 2600 band
  Domestic cellular and global GSM
  WiMAX 2300 and 2500

Electrical specifications:

  Frequency ranges: 698 to 960 MHz, 1710 to 2170 MHz, and 2300 to 2700 MHz
  Nominal gain (dBi): 698 to 960 MHz = 1.5 dBi, and 1710 to 2700 MHz = 3.5 dBi
  3 dB beam width (E plane): 698 to 960 MHz = 81 degrees, 1710 to 2170 MHz = 75 degrees, and 2300 to 2700 MHz = 100 degrees
  3 dB beam width (H plane): 360 degrees, omnidirectional
  Polarization: Vertical and linear
  Normal impedance: 50 ohms
  VSWR: < 2.5:1 (698 to 960 MHz) and < 2.0:1 (1710 to 2690 MHz)
  Radiation pattern: Omnidirectional

Mechanical specifications:

  Mount style: Mast mount, upright position only
  Environment: Outdoor
  Connector: N-type socket
  Antenna length (height): 9.8 x 1 in. (24.9 x 2.45 cm)
  Weight: 1.5 lb (0.68 kg)
  Dimensions (H x outside dimensions): 9.8 x 1 in. (248 x 24.5 mm)
  Operating temperature range: –22° to 158°F (–30° to 70°C)
  Storage temperature: –40° to 185°F (–40° to 85°C)
  Maximum power: 20W
  Radome: Polycarbonate, UV, white
  Material substance compliance: Reduction of Hazardous Substances (ROHS) compliant

ANT-4G-SR-OUT-TNC

Description: Cisco integrated 4G LTE low-profile outdoor saucer antenna:

  Applicable for both 3G and 4G LTE solutions
  Domestic LTE 700 band and global LTE 2600 band
  Domestic cellular and global GSM
  Weatherproof UV stable radome
  Performance optimized
  Excellent flame rating

Electrical specifications:

  Frequency ranges: 698 to 960 MHz and 1710 to 2700 MHz
  Peak gain with 1-ft (30.5-cm) cable: 1.5 dBi (698 to 960 MHz) and 3.7 dBi (1710 to 2700 MHz)
  Peak gain with 15-ft (457.2-cm) cable: 0.8 dBi (698 to 960 MHz) and 0.2 dBi (1710 to 2700 MHz)
  Average efficiency with 1-ft (30.5-cm) cable: 90% (698 to 960 MHz) and 82% (1710 to 2700 MHz)
  Average efficiency with 15-ft (457.2-cm) cable: 60% (698 to 960 MHz) and 40% (1710 to 2700 MHz)
  Polarization: Linear and vertical
  Nominal impedance: 50 ohms
  VSWR (maximum): 2.0:1 (698 to 960 MHz) and 2.0:1 (1710 to 2700 MHz)
  H-plane (3-dB beam width): Omnidirectional

Mechanical specifications:

  Power: 3W
  Cable: 15-ft (457.2 cm) LMR 195
  RF connector: Type N (f); TNC (plug) available
  Mount style: Ceiling mount
  Radome: PC/ABS, UV stable, black
  Material substance compliance: RoHS compliant
  Operational temperature: –22° to 158°F (–30° to 70°C)
  Storage temperature: –40° to 185°F (–40° to 85°C)
  Environment: Indoor
  Dimensions (H x outside dimensions): 3.4 x 7.9 in. (87 x 200 mm)

ANT-4G-PNL-OUT-N

Description: Cisco multiband panel outdoor 4G LTE antenna:

  Supports 3G and 4G LTE solutions
  Supports bands
  Wall or mast mount
  Indoor and outdoor
  Dual type-N socket connector

Electrical specifications:

  Frequency ranges: 698 to 960 MHz and 1710 to 2700 MHz
  VSWR: 2.0:1 maximum
  Gain: 5.5 to 10.5 dBi (698 to 960 MHz) and 6.5 to 9.0 dBi (1710 to 2700 MHz)
  3-dB beam width (vertical plane): 55 to 70 degrees = 698 to 960 MHz, 53 to 98 degrees = 1710 to 2200 MHz, 60 to 70 degrees = 2200 to 2500 MHz, and 55 to 70 degrees = 2500 to 2700 MHz
  3-dB beam width (horizontal plane): 55 to 70 degrees = 698 to 960 MHz and 50 to 90 degrees = 1710 to 2200 MHz
  F/B ratio: > 15 dB, typical 20 dB = 698 to 960 MHz, and > 17 dB, typical 23 dB = 1700 to 2700 MHz
  Isolation: > 30 dB
  Polarization: Slant +/– 45 degrees
  Nominal impedance: 50 ohms
  Radiation pattern: Directional

Mechanical specifications:

  Mount style: Wall or mast mount
  Environment: Outdoor
  Connector: Dual type-N socket (direct connect or dual 12 in. [30 cm])
  Antenna length (height): 11.6 in. (29.5 cm)
  Temperature range (operating): –22° to 158°F (–30° to 70°C)
  Storage temperature: –40° to 185°F (–40° to 85°C)
  Wind rating: 99 mi (160 km) per hr
  IP rating: IP 54
  Radome: Polycarbonate, UV resistant, white
  Material substance compliance: ROHS compliant

CGR-LA-NM-NF*

CGR-LA-NF-NF*

Description: Cisco Lightning Arrestor

  Broadband operation
  DC continuity for outdoor powering
  Reversed installation

Permanently installed gas capsule

Feature description:

  Arrestor type: Gas discharge tube
  Main path connectors: Port 1: protected, N plug (male); Port 2: unprotected, N jack (female, bulkhead side)
  Impedance: 50 ohms
  Frequency range: 0 MHz to 5800 MHz
  Return loss: Greater than or equal to 20 dB
  Insertion loss: Less than or equal to 0.2 dB
  RF continuous wave (CW) power: Less than or equal to 60W
  Surge current handling capability: 10 single, multiple kA (test pulse 8/20 ms)
  Residual pulse energy: 250 microsecond typically (test pulse 4 kV 1.2/50 microsecond; 2kA 8/20 microsecond), main path (protected side)
  Operating temperature range: -40° to 185°F (-40° to 85°C)
  Waterproof rating: IP 67 (according to IEC 60529, data refer to the coupled state)
  Mounting and grounding: MH24 (bulkhead)
  Material
   Housing: Brass
   Port 1 center contact: Gold-plated brass

Port 2 center contract copper beryllium alloy

* –N antenna works with –N cables and –N lightning arrestor.

SKU C887VAG-4G-GA-K9
Barcode # 882658702884
Brand Cisco
Shipping Weight 4.2100kg

Be The First To Review This Product!

Help other Device Deal users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought


More From This Category