WS-C2960XR-48FPS-I Overview
  • Forty eight (48) 10/100/1000 Ethernet Gigabit ports and four (4) 1G SFP uplink
  • Dual Core CPU with 512MB Memory (DRAM) and 128MB flash memory
  • Up to 8 switches stacking with 80G of stack throughput (optional)
  • Power over Ethernet Plus(PoE+) supports up to 740W of PoE budget for 24 ports with 30W per port or 48 ports with 15.4W per port
  • Dual field-replaceable power redundant modular option (optional)
  • Energy-efficient solution reduce power consumption
  • IP Lite base Cisco IOS software feature set

Cisco catalyst 2960XR-48FPS-I IP Lite Base layer 2 - 3 stackable switch is comprised of 48 * 10/100/1000 Ethernet ports with POE+ and 4 SFP uplink interfaces. Advanced energy management solution with intelligent services reduces the cost of business development. FlexStack plus technology support up to 8 switches stacking with 80Gbps of stack throughput. Cisco IOS software features enhance forwarding process and USB/Ethernet management interface simplify the operations. The industry standard IEEE802.3at PoE+ provide up to 30W per port. Netflow lite simplifies the network traffic monitoring procedure by capturing and recording packet flows in order to troubleshoot the thrill of the network. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM, etc.

*Note: If stack to be used, additional stack module C2960X-STACK will be needed.

(WS-C2960XR-48FPS-I)

WS-C2960XR-48FPS-I Specifications

   
model info: WS-C2960XR-48FPS-I  
enclosure type Rack-mountable - 1U  
Ports 48 x 10/100/1000 (POE+) + 4 x 1G SFP  
Network management Interface 10/100 Mbps Ethernet (RJ-45)  
Available PoE Power 740W  
Forwarding bandwidth(Gbps) 108Gbps  
Maximum stacking number 8  
Stack Bandwidth 80G  
Forwarding Performance 107.1Mpps  
Switching bandwidth 216Gbps  
Maximum active VLANs 1023  
MAC Address Table Size 16K (default)  
CPU APM86392 600MHz dual core  
RAM 512 MB   
Flash Memory 128 MB   
Status Indicators Per-port status: Link integrity, disabled, activity, speed, and full duplex
System status: System, RPS, Stack link status, link duplex, and link speed
 
Expansion / Connectivity    
Console ports USB (Type-B), Ethernet (RJ-45)  
Expansion Slot(s) 1 FlexStack-Plus slot and 1 power redundant slot  
Stack Modules C2960X-STACK  
Stacking cable CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length
 
Power supply PWR-C2-1025WAC  
Power Device Power supply - redundant - plug-in module  
Power Redundancy option  
Voltage range (Auto) 110V-240V  
Power Consumption Operational 0.89kVA  
Miscellaneous    
Width 17.5 Inches (44.5 Cm)  
Depth 16 Inches (40.8 Cm)  
Height 1.75 Inches (4.45 Cm)  
Weight 14.7 Pounds (6.7Kgs)  
Rack Mounting Kit Optional  
 MTBF in hours 230,860  
Compliant Standards IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab (LLDP)
IEEE 802.3ad
IEEE 802.3af and IEEE 802.3at
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
RMON I and II standards
SNMP v1, v2c, and v3
IEEE 802.3az
IEEE 802.3ae 10Gigabit Ethernet
IEEE 802.1ax
IEEE 802.3af and IEEE 802.3at
System software / license    
System software IOS IP Lite  
license ENERGY-MGMT, ENERGY-MGT-100-K9  
features  IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub)  
   Advanced IP unicast routing protocols (OSPF for Routed Access)   
   EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.  
   Equal-cost routing Policy-based routing (PBR)   
   Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)  
   Protocol Independent Multicast (PIM)  
Network security  MAC-based VLAN assignment enables Cisco TrustSec uses  
   Comprehensive 802.1X IPv6 First-Hop Security  
   Device Sensor and Device Classifier  Cisco Trust Anchor Technology  
   Cisco Threat Defense Private VLANs   
   Unicast Reverse Path Forwarding (uRPF) Multidomain Authentication  
   Access Control Lists (ACLs) Switched Port Analyzer (SPAN)  
   Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3)   
   TACACS+ and RADIUS authentication MAC Address Notification  
   Multilevel security on console access  BPDU Guard  
   Spanning Tree Root Guard (STRG) IGMP filtering   
Management & Troubleshooting ●Auto-MDOX ●TDR ● UDLD ● IP SLA Responder ● layer 2 / IP Traceroute ● SPAN ● RSPAN ● Express Setup ● Device Manager ● Cisco Network Assistant ● Smartports + Advisor ● Troubleshooting Advisor ● Drag-and-drop Cisco IOS Upgrade ● IP Address DHCP ● Autoinstall with saved configuration ● Configuration Replace ● DHCP Auto Image Upgrade ● DHCP Port Based Allocation ● Error Disable MIB  
Technical Support and Services Cisco SMARTnet Service Cisco Smart Foundation Service Cisco Smart Care Service Cisco SP Base Service Cisco Focused Technical Support Services  
Environmental Ranges    
  Fahrenheit Centigrade
Operating temperature up to 5000 ft (1500 m) 23ºF to 113º -5ºC to 45ºC
Operating temperature up to 10,000 ft (3000 m) 23ºF to 104ºF -5ºC to 40ºC
Short-term exception at sea level* 23ºF to 131ºF -5ºC to 55ºC
Short-term exception up to 5000 feet (1500 m)* 23ºF to 122ºF -5ºC to 50ºC
Short-term exception up to 10,000 feet (3000 m)* 23ºF to 113ºF -5ºC to 45ºC
Short-term exception up to 13,000 feet (4000 m)* 23º to 104ºF -5ºC to 40ºC
Storage temperature up to 15,000 feet (4573 m) -13º to 158ºF -25º to 70ºC
  Feet Meters
Operating altitude Up to 10,000 Up to 3000
Storage altitude Up to 13,000 Up to 4000
Operating relative humidity 10% to 95% noncondensing  
Storage relative humidity 10% to 95% noncondensing  
SKU WS-C2960XR-48FPS-I
Model # C3850-NM-2-10G
Barcode # 882658598180
Brand Cisco
Shipping Weight 8.9500kg
Shipping Width 0.550m
Shipping Height 0.180m
Shipping Length 0.450m
Shipping Cubic 0.044550000m3

Standard Hardware Warranty Policy :


Original new sealed Cisco product: 1 Year
Used Cisco product: 3 Month

 

Return Material Authorization (RMA) Process

The Support Contacts :
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

The RMA Confirmation :
Your sales representative will send you RMA form.
(see attachment. PO No.; Product Serial No.; Description of Failure or Problem)
You Fill it and send back to sales representative.

RMA Return Shipment :
A : After ot RMA form, sales representative will tell you returned instruction by email, including shipping address and special shipping invoice.
B : Returned products have to be packed properly to avoid damage during delivery.
C : All accessories and user documentations should be returned.
D : Once shipped, pls tell sales representative tracking No. immediately.

Delivery Charges :
The Customer is responsible for paying shipment charges when returning to us; We will pay for shipment of the repaired items back to the customer

RMA Turnaround Time :
The defective products will be sent to Cisco Distributor for repair.
Within four weeks after receipt of returned item, the repaired or replacement item will be ready for return shipment.
Then item will be shipped to customer.

 

Really terrific!

By: on 19 March 2015
The best switch that covers my needs, so happy to use it.
(5)

Write a product review

Others Also Bought


More From This Category