StarTech.com ST103008U2C

10-port USB 3.0 hub with two 1.5A charge-and-sync ports

A powered 10-port USB 3.2 Gen 1 hub with eight standard USB-A data ports, two 1.5A charge-and-sync USB-A ports, 5Gbps bandwidth and USB Battery Charging 1.2.

10 × USB-AUSB 5Gbps2 × 1.5A charge/sync2-year warranty

StarTech ST103008U2C 10-port USB hub with charge and sync ports

Key capabilities

Ten USB 3.2 Gen 1 ports

Expands one compatible USB host connection into ten USB-A device ports.

Two 1.5A charge-and-sync ports

Two dedicated downstream ports support higher-current charging and data synchronisation.

USB Battery Charging 1.2

Supports BC 1.2 for compatible mobile-device charging.

48W universal power adapter

The exact technical specification lists a 12V / 4A, 48W external adapter.

What to know before buying

If the host computer is off, asleep or disconnected, the charge-and-sync ports can switch to fast-charge mode; when the host is active they provide standard charging plus data sync. USB 2.0 hosts limit performance.

Australian version and manufacturer warranty

This item is the Australian version supplied by DeviceDeal and is covered by the official StarTech.com 2-year manufacturer warranty in Australia.

Please retain your DeviceDeal tax invoice as proof of purchase. Warranty coverage and claims are subject to StarTech.com warranty terms, eligibility requirements and product assessment.

Frequently asked questions

How many USB ports does ST103008U2C provide?

Ten USB-A downstream ports.

How many are charge-and-sync ports?

Two.

What current is listed for the charge-and-sync ports?

1.5A each.

What USB transfer speed is supported?

Up to 5Gbps.

Does it support USB Battery Charging 1.2?

Yes.

Is an external power adapter included?

Yes, a universal 48W adapter is included.

Does it require drivers?

No. The exact specification states OS-independent operation.

What warranty applies in Australia?

The Australian version supplied by DeviceDeal is covered by the official StarTech.com 2-year manufacturer warranty in Australia, subject to StarTech.com terms and product assessment.

(ST103008U2C)

Features and highlights

Ten USB 3.2 Gen 1 ports

Expands one compatible USB host connection into ten USB-A device ports.

Two 1.5A charge-and-sync ports

Two dedicated downstream ports support higher-current charging and data synchronisation.

USB Battery Charging 1.2

Supports BC 1.2 for compatible mobile-device charging.

48W universal power adapter

The exact technical specification lists a 12V / 4A, 48W external adapter.

10 × USB-A
USB 5Gbps
2 × 1.5A charge/sync
2-year warranty

Warranty confidence: Official StarTech.com 2-year manufacturer warranty in Australia, subject to StarTech.com terms and assessment.

Specifications

Verified specifications for StarTech ST103008U2C.

Warranty Information

Warranty	2 Years

Hardware

Bus Type	USB 3.0
Chipset ID	VIA/VLI - VL812
Fast-Charge Port(s)	Yes
Industry Standards	USB Battery Charging Specification Rev. 1.2
Industry Standards	USB 3.0 - Backward compatible with USB 2.0/1.1
Interface	USB 3.0
Ports	10
USB-C Device Port(s)	No
USB-C Host Connection	No

Performance

Maximum Data Transfer Rate	5 Gbps
Type and Rate	USB 3.0 - 5 Gbit/s

Connector(s)

Connector Type(s)	8 - USB Type-A (9 pin) USB 3.0 Female
Connector Type(s)	2 - USB 3.0 A (Fast-Charge, 9 pin) Female

Software

OS Compatibility	OS Independent; No additional drivers or software required

Special Notes / Requirements

Note	If connected to a USB 2.0 host port, performance may be limited
Note	Charge and sync port(s) with a fast-charge icon: If your host computer is turned off, in sleep mode, or disconnected, the hub will disable data sync mode and enable fast-charge mode automatically If your host computer is turned on, a charge and sync port will provide a standard charge to a connected device plus simultaneous data sync capabilities
System and Cable Requirements	Host computer with an available USB 3.0 port

Indicators

LED Indicators	10 - Port status (Blue)

Power

Center Tip Polarity	Positive
Input Current	1.0 A
Input Voltage	100 - 240 AC
Output Current	4 A
Output Voltage	12 DC
Plug Type	N
Power Consumption (In Watts)	48
Power Source	AC Adapter Included

Environmental

Humidity	10% ~ 90% RH (Non-condensing)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-10°C to 70°C (14°F to 158°F)

Physical Characteristics

Color	Black
Enclosure Type	Plastic
Form Factor	Desktop
Product Height	0.9 in [2.4 cm]
Product Length	7.9 in [20.1 cm]
Product Width	2.4 in [60 mm]
Weight of Product	5.1 oz [144 g]

Packaging Information

Package Height	2.9 in [73 mm]
Package Length	7.6 in [19.4 cm]
Package Width	11.5 in [29.3 cm]
Shipping (Package) Weight	22.6 oz [639 g]

What's in the Box

Included in Package	1 - 10-port USB 3.0 hub with charge & sync ports
Included in Package	1 - USB 3.0 host cable [80 cm/31.5 in.]
Included in Package	1 - universal power adapter
Included in Package	4 - universal power adapter (NA/JP, UK, EU, ANZ)

SKU	ST103008U2C
Barcode #	65030861731
Brand	STARTECH
Shipping Weight	0.6400kg
Shipping Width	0.190m
Shipping Height	0.070m
Shipping Length	0.291m
Shipping Cubic	0.003870000m3

2-year official manufacturer warranty

StarTech.com warranty in Australia

This item is the Australian version supplied by DeviceDeal and is covered by the official StarTech.com 2-year manufacturer warranty in Australia.

Please retain your DeviceDeal tax invoice as proof of purchase.

Warranty coverage and claims are subject to StarTech.com warranty terms, eligibility requirements and product assessment. This wording does not promise automatic replacement or guaranteed claim approval.