The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.

The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.

(IDE2SAT2)

Warranty Information
	Warranty	2 Years
Hardware
	Chipset ID	Marvell - 88SA8052
	Compatible Drive Types	SATA
	Drive Size	2.5in & 3.5in
	Interface	IDE
	Number of Drives	1
Performance
	Maximum Data Transfer Rate	133MB/sec
	RAID	No
Connector(s)
	Connector Type(s)	1 - IDE (40 Pin, EIDE/PATA)
		1 - SATA Data & Power Combo (7+15 pin)
		1 - SP4 (4 pin, Small Drive Power)
Software
	OS Compatibility	OS independent; No software or drivers required
Special Notes / Requirements
	System and Cable Requirements	An IDE controller and ATA cable (not included).
Environmental
	Humidity	15~90% RH
	Operating Temperature	5°C to 50°C (40°F to 122°F)
	Storage Temperature	-25°C to 80°C (-13°F to 176°F)
Physical Characteristics
	Enclosure Type	Steel and Plastic
	Product Height	0.9 in [2.3 cm]
	Product Length	3 in [75.5 mm]
	Product Width	0.8 in [20 mm]
	Weight of Product	1 oz [29 g]
Packaging Information
	Package Height	1.3 in [33 mm]
	Package Length	5.7 in [14.5 cm]
	Package Width	6.9 in [17.5 cm]
	Shipping (Package) Weight	3.1 oz [89 g]
What's in the Box
	Included in Package	1 - IDE to SATA adapter
		1 - LP4 Molex to SP4 Power Cable
		1 - Instruction Manual

SKU	IDE2SAT2
Barcode #	65030852258
Brand	STARTECH
Shipping Weight	0.3000kg
Shipping Width	0.100m
Shipping Height	0.050m
Shipping Length	0.170m
Shipping Cubic	0.000850000m3