StarTech.com · J9150D-ST

StarTech J9150D-ST HPE J9150D-Compatible 10GBASE-SR SFP+ Transceiver

HPE J9150D-Compatible 10GBASE-SR SFP+ Transceiver for professional networking or ergonomic workstation applications.

Quick answer: J9150D-ST provides a 10GbE 10GBASE-SR link over multimode fibre through LC duplex.

Best forShort-range 10GbE uplinks in compatible HPE switches and routers, with reach up to 300m on suitable multimode fibre.

Check before orderingConfirm HPE J9150D coding, an SFP+ host slot, 850nm multimode fibre, LC duplex connectors and required distance.

Answers before you buy

Frequently asked questions

What is StarTech J9150D-ST?

It is a HPE-compatible multimode SFP+ transceiver that provides a 10GbE 10GBASE-SR link over multimode fibre through LC duplex.

Which connections or mounting method are provided?

SFP+ slot to LC duplex fibre

What performance is specified?

10GBASE-SR; 10GbE; up to 10.31Gbps; 850nm; multimode fibre; 300m

Does it require power?

Less than 1.3W

Which 10GbE standard is supported?

This module supports 10GBASE-SR over multimode fibre at 850nm for distances up to 300m.

Is the module hot-swappable?

Yes. It is hot-swappable in compatible host equipment, helping minimise network disruption during replacement.

What should be checked before ordering?

Confirm HPE J9150D coding, an SFP+ host slot, 850nm multimode fibre, LC duplex connectors and required distance.

What warranty applies?

J9150D-ST carries a StarTech.com limited lifetime manufacturer warranty, subject to the manufacturer's terms and eligibility requirements.

Planning a broader setup? Browse the DeviceDeal buying guides.

(J9150D-ST)

Features & highlights

Why choose J9150D-ST?

?Purpose-built designSFP+ slot to LC duplex fibre

?Specified performance10GBASE-SR; 10GbE; up to 10.31Gbps; 850nm; multimode fibre; 300m

?Power arrangementLess than 1.3W

?Construction and deploymentHot-swappable steel SFP+ module with DDM

?Key capabilityDDM support enables compatible management tools to monitor transceiver status.

?Installation advantageDesigned, programmed and tested for HPE J9150D host compatibility.

Compatibility reminder: Confirm HPE J9150D coding, an SFP+ host slot, 850nm multimode fibre, LC duplex connectors and required distance.

StarTech J9150D-ST HPE J9150D-Compatible 10GBASE-SR SFP+ Transceiver product image

Technical specifications

J9150D-ST specifications

Exact-model specifications for compatibility checking. Measurements may be rounded.

Warranty Information
Warranty	Lifetime
Hardware
Compatible Brand	HPE
Industry Standard	IEEE 802.3ae 10GBASE-SR
Material	Steel
Performance
Maximum Data Transfer Rate	10.31Gbps
Fibre Type	Multimode
Wavelength	850nm
Maximum Distance	300m
DDM	Yes
Power Consumption	<1.3W
MTBF	498,745,585 hours
Connectors
Connector A	SFP+ slot
Connector B	LC duplex fibre
Environmental
Operating Temperature	0°C to 70°C
Storage Temperature	-40°C to 85°C
Physical Characteristics
Dimensions	58.4 × 13.9 × 14mm
Weight	20g
What's in the Box
Included	1 × SFP+ transceiver module

Sources: https://www.devicedeal.com.au/startech-hpe-j9150d-compatible-sfp-10gbe-mmf-trans and https://www.startech.com/

SKU	J9150D-ST
Barcode #	65030886093
Brand	Startech
Shipping Weight	0.0500kg
Shipping Width	0.003m
Shipping Height	0.011m
Shipping Length	0.009m

Manufacturer warranty

Lifetime

This Australian-version product is supplied by DeviceDeal and is covered by the limited lifetime manufacturer warranty term listed for this exact product.

Keep your DeviceDeal tax invoice as proof of purchase.
Coverage is subject to StarTech.com warranty terms, eligibility and product assessment.
Warranty service does not replace rights that may apply under Australian Consumer Law.