Fast SATA access
Connect a compatible SATA HDD or SSD through a USB 3.2 Gen 2 10Gbps Type-A port, with SATA III performance up to 6Gbps.
Access one 2.5-inch or 3.5-inch SATA HDD or SSD through USB 10Gbps, with an included 24W universal power adapter for full-size drives.

Direct, product-specific information to help confirm whether this model fits the intended setup.
Connect a compatible SATA HDD or SSD through a USB 3.2 Gen 2 10Gbps Type-A port, with SATA III performance up to 6Gbps.
Support UASP, TRIM, 4Kn, S.M.A.R.T. and hot-swap operation with compatible drives, operating systems and host controllers.
Bus-power compatible 2.5-inch drives or use the included universal 12V DC, 2A power adapter for 3.5-inch drives.
Use the adapter without installing a device driver; the official specification lists operating-system-independent compatibility.
Supplied by DeviceDeal and covered by the official StarTech.com manufacturer warranty in Australia. Retain your DeviceDeal tax invoice; coverage and claims are subject to StarTech.com warranty terms, eligibility requirements and product assessment.
Still comparing options? Visit the DeviceDeal Buying Guides for practical product-selection help.
Verified installation guidance shown on this exact DeviceDeal product page.
Quick answers based on the supplied product information and specifications.
It connects one compatible 2.5-inch or 3.5-inch SATA HDD or SSD to a USB 3.2 Gen 2 Type-A computer.
It supports one compatible 2.5-inch or 3.5-inch SATA HDD or SSD. Optical ATAPI drives are not supported.
The current official specification lists testing up to 6TB.
Yes. UASP and TRIM are supported when the connected drive, operating system and USB host controller also support them.
Compatible 2.5-inch drives may be bus powered. A 3.5-inch drive requires the included universal 12V DC, 2A power adapter.
No. RAID is not supported, and the adapter is not compatible with optical ATAPI drives.
No. The official specification lists operating-system-independent operation with no driver installation required.
The Australian-version product supplied by DeviceDeal is covered by a two-year official StarTech.com manufacturer warranty in Australia, subject to StarTech.com terms, eligibility and product assessment.
(USB312SAT3)
StarTech USB312SAT3
Connect a compatible SATA HDD or SSD through a USB 3.2 Gen 2 10Gbps Type-A port, with SATA III performance up to 6Gbps.
Support UASP, TRIM, 4Kn, S.M.A.R.T. and hot-swap operation with compatible drives, operating systems and host controllers.
Bus-power compatible 2.5-inch drives or use the included universal 12V DC, 2A power adapter for 3.5-inch drives.
Use the adapter without installing a device driver; the official specification lists operating-system-independent compatibility.
StarTech USB312SAT3 specifications organised from the supplied product data.

| Warranty | 2 Years |
|---|
| Bus Type | USB 3.2 Gen 2 (10Gbps) |
|---|---|
| Chipset ID | ASMedia - ASM235CM |
| Drive Interface | SATA III (6Gbps) |
| Number of Drives | 1 |
| Compatible Drive Type | 2.5-inch and 3.5-inch SATA HDD or SSD |
| Maximum USB Data Transfer Rate | 10Gbps |
|---|---|
| Maximum SATA Data Transfer Rate | 6Gbps |
| Maximum Tested Drive Capacity | 6TB |
| UASP Support | Yes |
| TRIM Support | Yes |
| 4Kn Support | Yes |
| S.M.A.R.T. Support | Yes |
| Hot Swap | Yes |
| RAID Support | No |
| Host Connector | 1 × USB 3.2 Gen 2 Type-A male |
|---|---|
| Drive Connector | 1 × 22-pin SATA data and power receptacle |
| OS Compatibility | Operating-system independent; no driver installation required |
|---|
| Optical Drives | Not compatible with optical ATAPI drives |
|---|---|
| Drive Requirement | One compatible 2.5-inch or 3.5-inch SATA HDD or SSD; tested up to 6TB |
| Power Source | USB bus power for compatible 2.5-inch drives; external adapter included for 3.5-inch drives |
|---|---|
| Input Voltage | 100240V AC |
| Input Current | 0.6A |
| Output Voltage | 12V DC |
| Output Current | 2A |
| Output Power | 24W |
| Centre-Tip Polarity | Positive |
| Plug Type | Type M |
| Color | Black |
|---|---|
| Product Length | 3.3 in [8.5cm] |
| Product Width | 0.9 in [2.3cm] |
| Product Height | 0.7 in [1.8cm] |
| Weight of Product | 2.0 oz [57g] |
| Package Quantity | 1 |
|---|---|
| Package Length | 7.0 in [17.7cm] |
| Package Width | 5.7 in [14.4cm] |
| Package Height | 2.0 in [5.2cm] |
| Shipping (Package) Weight | 11.2 oz [318g] |
| Included in Package | 1 × USB 10Gbps to SATA adapter; 1 × universal NA/UK/EU/ANZ power adapter with 94mm cable; 1 × quick-start guide |
|---|
| SKU | USB312SAT3 |
| Barcode # | 65030863797 |
| Brand | Startech |
| Shipping Weight | 0.3200kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.050m |
| Shipping Length | 0.170m |
| Shipping Cubic | 0.000850000m3 |
This is the Australian-version product supplied by DeviceDeal and is covered by the official StarTech.com manufacturer warranty in Australia for 2 years.
Please retain the DeviceDeal tax invoice as proof of purchase. Warranty coverage and claims are subject to StarTech.com warranty terms, eligibility requirements and product assessment.
Help other Device Deal users shop smarter by writing reviews for products you have purchased.