Configurable two-panel system
Install the two 3ft panels end-to-end for full-height routing or position them on different sides, fronts or rears of the rack.
StarTech 1.8m Vertical D-Ring Hook Cable Organizer - CMVER40UD
Model # CMVER40UD
-
SKU: CMVER40UD
- Pick Up Available
- Australian Warranty
- Checkout Securely
StarTech.com · CMVER40UD
StarTech 40U Vertical D-Ring Rack Cable Organiser - 2 Panels
Route cables across a full-height rack with two configurable 3ft vertical steel panels providing 30 integrated D-rings and 0U side mounting.
Two 3ft panels30 D-rings40U coverage2-year warranty
Product overview
CMVER40UD can install end-to-end to cover approximately 40U or place the two panels in separate rack locations. It is designed for most racks that are 40U or larger and supports tool-less keyhole or rail mounting where available.
Features that matter
Thirty integrated D-rings
Open D-rings guide cable bundles vertically while keeping them accessible for maintenance and changes.
0U equipment-space use
Side-of-rack mounting organises full-height cable runs without consuming equipment rack units.
Flexible mounting options
Supports tool-less keyhole mounting, horizontal-rail attachment and other suitable rack mounting points.
What to know before ordering
Rack requirement
Designed for most standard 19-inch racks that are 40U or larger; confirm compatible mounting holes or rails.
Two-piece length
The product uses two separate 3ft panels rather than one continuous 6ft panel.
Cable capacity
Practical capacity depends on cable diameter, connector size and bend radius; avoid overfilling the D-rings.
Warranty confidence in Australia
Australian version · Official StarTech.com warranty
This item is the Australian version supplied by DeviceDeal and is covered by the official two-year StarTech.com manufacturer warranty in Australia. Retain your DeviceDeal tax invoice as proof of purchase. Coverage and claims are subject to StarTech.com warranty terms, eligibility requirements and product assessment.
Frequently asked questions
What is StarTech CMVER40UD?
CMVER40UD is a two-panel vertical D-ring cable-management system providing approximately 40U of rack-height coverage.
How many panels are included?
Two separate 3ft (91cm) vertical cable-organiser panels are included.
How many D-rings are provided?
The two panels provide 30 integrated D-rings in total.
Does it consume rack units?
It is approximately 40U tall but installs beside the equipment area, so it occupies 0U of equipment-mounting space.
Can the panels be installed separately?
Yes. They can be installed end-to-end or positioned on different sides or at the front and rear of a compatible rack.
Which racks are suitable?
It is designed for most standard 19-inch racks that are 40U or larger, subject to suitable mounting holes or horizontal rails.
What is included in the package?
The package contains two vertical cable organisers, four M4 x 16mm screws, eight M4 nuts, eight 12mm washers and one instruction manual.
What warranty applies in Australia?
CMVER40UD is the Australian version supplied by DeviceDeal and is covered by the official two-year StarTech.com manufacturer warranty in Australia, subject to StarTech.com terms, eligibility and product assessment.
(CMVER40UD)
Features and highlights
CMVER40UD key capabilities
Product-specific highlights verified for this exact StarTech.com model.
Configurable two-panel system
Install the two 3ft panels end-to-end for full-height routing or position them on different sides, fronts or rears of the rack.
Thirty integrated D-rings
Open D-rings guide cable bundles vertically while keeping them accessible for maintenance and changes.
0U equipment-space use
Side-of-rack mounting organises full-height cable runs without consuming equipment rack units.
Flexible mounting options
Supports tool-less keyhole mounting, horizontal-rail attachment and other suitable rack mounting points.
Key highlights
- 2 x 3ft vertical panels
- 30 integrated D-rings
- For most 40U+ racks
- Front or rear mounting
- Official two-year StarTech.com manufacturer warranty in Australia
Technical specifications
StarTech CMVER40UD
Verified specifications and package details for the exact model.
General and Compatibility
Product type
Two-panel vertical D-ring cable organiser
Rack-height coverage
40U
Equipment rack space used
0U when side-mounted
Recommended rack size
Most standard 19-inch racks 40U or larger
Orientation
Vertical
Mounting options
Front and rear; keyhole, horizontal rail or suitable alternative points
Warranty
2 Years
Construction and Cable Routing
Frame material
Steel
D-ring material
Plastic
Colour
Black
Panels
2 x 3ft (91cm)
Integrated D-rings
30 total
Physical and Packaging
Combined product dimensions (L x W x H)
50 x 1727 x 87mm
Product weight
Approximately 1.5kg
Package dimensions (L x W x H)
940 x 154 x 106mm
Shipping weight
Approximately 2.1kg
Package Contents
Included items
2 x vertical cable organisers; 4 x M4 x 16mm screws; 8 x M4 nuts; 8 x 12mm washers; instruction manual
| SKU | CMVER40UD |
| Barcode # | 65030864800 |
| Brand | STARTECH |
| Shipping Weight | 2.1000kg |
| Shipping Width | 0.140m |
| Shipping Height | 0.120m |
| Shipping Length | 0.945m |
| Shipping Cubic | 0.015876000m3 |
Official StarTech.com manufacturer warranty
2 Years
This item is the Australian version supplied by DeviceDeal and is covered by the official two-year StarTech.com manufacturer warranty in Australia. Retain your DeviceDeal tax invoice as proof of purchase. Coverage and claims are subject to StarTech.com warranty terms, eligibility requirements and product assessment.
This warranty statement applies to StarTech CMVER40UD.
Be The First To Review This Product!
Help other Device Deal users shop smarter by writing reviews for products you have purchased.
