SaleDaily DealsClearanceBuying Guides
StarTech 2x M.2 SATA SSD Controller Card - PCIe PEX2M2
StarTech.com · PEX2M2

StarTech 2x M.2 SATA SSD Controller Card - PCIe PEX2M2

Dual-slot M.2 SATA SSD controller card for installing two B-key M.2 SATA drives in a PCIe x4 or larger desktop slot.

Quick answer: Adds two M.2 SATA III drive positions through PCIe, supporting common 2230, 2242, 2260, 2280 and 22110 form factors.
Best forExpanding internal SATA SSD storage, reusing laptop M.2 SATA drives or recovering data from compatible M.2 SATA media.
Check before orderingThis card supports M.2 SATA B-key drives, not PCIe/NVMe M-key drives. It requires a PCIe x4 or larger slot and does not provide RAID.
Answers before you buy

Frequently asked questions

What does PEX2M2 do?

Adds two M.2 SATA III drive positions through PCIe, supporting common 2230, 2242, 2260, 2280 and 22110 form factors.

Who is this product best for?

Expanding internal SATA SSD storage, reusing laptop M.2 SATA drives or recovering data from compatible M.2 SATA media.

What should I check before ordering?

This card supports M.2 SATA B-key drives, not PCIe/NVMe M-key drives. It requires a PCIe x4 or larger slot and does not provide RAID.

Does it require drivers or software?

The controller is operating-system independent and requires no additional drivers or software.

What is included in the package?

Dual M.2 SATA controller card, low-profile bracket, M.2 mounting hardware and quick-start guide.

What is the key installation requirement?

Mount compatible M.2 SATA drives to the card, secure them with the supplied hardware and install the card in a PCIe x4 or larger slot.

Is it suitable for an Australian setup?

Yes. DeviceDeal supplies the Australian-market version; always confirm the available ports, power and system compatibility for your installation.

What warranty applies?

PEX2M2 carries a StarTech.com 2 years manufacturer warranty, subject to the manufacturer’s terms and eligibility requirements.

Planning a broader setup? Browse the DeviceDeal buying guides. View the DeviceDeal product page.

(PEX2M2)

Features & highlights

Why choose PEX2M2?

?Two M.2 SATA slotsInstall two compatible B-key NGFF SATA solid-state drives.
?SATA III 6GbpsSupports SATA I, II and III drive signalling.
?Five common drive lengthsWorks with 2230, 2242, 2260, 2280 and 22110 M.2 SATA drives.
?ASMedia ASM1062 controllerProvides native two-port SATA connectivity over PCI Express.
?No software requiredOperating-system-independent design simplifies installation.
?Dual-profile supportStandard and low-profile chassis installation is supported.
Compatibility reminder: This card supports M.2 SATA B-key drives, not PCIe/NVMe M-key drives. It requires a PCIe x4 or larger slot and does not provide RAID.
StarTech 2x M.2 SATA SSD Controller Card - PCIe PEX2M2 product image
Technical specifications

PEX2M2 specifications

Exact-model specifications for compatibility checking.

Warranty Information
Warranty2 Years
Hardware
Bus TypePCI Express
Card TypeStandard Profile (LP bracket incl.)
Chipset IDASMedia - ASM1062
Industry StandardsSerial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
InterfaceM.2 SATA
Port StyleIntegrated on Card
Ports2
Performance
Port MultiplierNo
RAIDNo
Type and RateSATA III (6 Gbps)
Connector(s)
Connector Type(s)1 - PCI Express x4 Male
Internal Ports2 - M.2 (SATA, B-Key, NGFF) Receptacle
Additional Internal Port1 - SP4 (4 pin, Small Drive Power)
Software
OS CompatibilityOS Independent; No additional drivers or software required
Special Notes / Requirements
NoteThe maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
System and Cable RequirementsPCI Express x4 slot (backward compatible with x8, and x16 slots)
Environmental
Humidity20%~80% RH (Non-condensing)
Operating Temperature5°C to 50°C (41°F to 122°F)
Storage Temperature-25°C to 70°C (-13°F to 158°F)
Physical Characteristics
Product Height4.7 in [12 cm]
Product Length7.1 in [18 cm]
Product Width0.8 in [20 mm]
Weight of Product2.2 oz [62 g]
Packaging Information
Package Height1.9 in [48 mm]
Package Length6.3 in [16 cm]
Package Width8.6 in [21.8 cm]
Shipping (Package) Weight5.9 oz [167 g]
What's in the Box
Included in Package1 - M.2 SATA SSD controller card
Additional Items1 - low-profile bracket; M.2 mounting hardware; 1 - quick-start guide

Sources: supplied product file, DeviceDeal product page and official StarTech.com specifications. Product appearance and specifications may change; confirm critical deployment requirements before ordering.

SKU PEX2M2
Barcode # 65030863049
Brand Startech
Shipping Weight 0.1600kg
Shipping Width 0.100m
Shipping Height 0.050m
Shipping Length 0.210m
Shipping Cubic 0.001050000m3
Manufacturer warranty
2 Years

This Australian-version product is supplied by DeviceDeal and is covered by the official StarTech.com 2 years manufacturer warranty in Australia.

  • Keep your DeviceDeal tax invoice as proof of purchase.
  • Coverage is subject to StarTech.com warranty terms, eligibility and product assessment.
  • Warranty service does not replace rights that may apply under Australian Consumer Law.

Be The First To Review This Product!

Help other Device Deal users shop smarter by writing reviews for products you have purchased.

Write a product review

StarTech 2x M.2 SATA SSD Controller Card - PCIe PEX2M2

Model # PEX2M2

  • SKU: PEX2M2

$57.00
Only 3 left!



More From This Category