SaleDaily DealsClearanceBuying Guides
StarTech x4 PCI Express to M.2 PCIe SSD Adapter Card, for M.2 NGFF SSD - PEX4M2E1
StarTech.com · PEX4M2E1

StarTech x4 PCI Express to M.2 PCIe SSD Adapter Card, for M.2 NGFF SSD - PEX4M2E1

PCIe x4 expansion adapter for installing one M-key M.2 PCIe NVMe or AHCI SSD directly in a desktop computer.

Quick answer: Mounts one 2242, 2260, 2280 or 22110 M.2 PCIe M-key SSD in a PCIe x4 or larger slot without a separate data cable.
Best forAdding fast internal NVMe storage, upgrading a workstation or accessing data on a compatible M.2 PCIe SSD.
Check before orderingThis adapter is for PCIe/NVMe or AHCI M-key drives, not M.2 SATA drives. The host system and OS must support NVMe when applicable.
Answers before you buy

Frequently asked questions

What does PEX4M2E1 do?

Mounts one 2242, 2260, 2280 or 22110 M.2 PCIe M-key SSD in a PCIe x4 or larger slot without a separate data cable.

Who is this product best for?

Adding fast internal NVMe storage, upgrading a workstation or accessing data on a compatible M.2 PCIe SSD.

What should I check before ordering?

This adapter is for PCIe/NVMe or AHCI M-key drives, not M.2 SATA drives. The host system and OS must support NVMe when applicable.

Does it require drivers or software?

The adapter requires no software, but NVMe boot and drive support depend on the motherboard firmware and operating system.

What is included in the package?

M.2 PCIe adapter, installed full-profile bracket, low-profile bracket, SSD standoff and screw, and quick-start guide.

What is the key installation requirement?

Secure the M.2 SSD in the correct mounting position, install the adapter in a PCIe x4 or larger slot and confirm NVMe support in the host.

Is it suitable for an Australian setup?

Yes. DeviceDeal supplies the Australian-market version; always confirm the available ports, power and system compatibility for your installation.

What warranty applies?

PEX4M2E1 carries a StarTech.com 2 years manufacturer warranty, subject to the manufacturer’s terms and eligibility requirements.

Planning a broader setup? Browse the DeviceDeal buying guides. View the DeviceDeal product page.

(PEX4M2E1)

Features & highlights

Why choose PEX4M2E1?

?PCIe x4 M.2 storageAdds one M-key M.2 PCIe SSD directly to the motherboard expansion bus.
?NVMe and AHCI supportWorks with compatible PCIe-based M.2 drives using supported host software.
?Four drive lengthsSupports 2242, 2260, 2280 and 22110 form factors.
?PCIe 3.0 performanceUses four PCIe lanes and remains backward compatible with earlier PCIe generations.
?No data cable requiredThe drive mounts directly on the expansion card.
?Dual-profile bracketsSupports full-height and low-profile computer chassis.
Compatibility reminder: This adapter is for PCIe/NVMe or AHCI M-key drives, not M.2 SATA drives. The host system and OS must support NVMe when applicable.
StarTech x4 PCI Express to M.2 PCIe SSD Adapter Card, for M.2 NGFF SSD - PEX4M2E1 product image
Technical specifications

PEX4M2E1 specifications

Exact-model specifications for compatibility checking.

Warranty Information
Warranty2 Years
Hardware
Bus TypePCI Express
Compatible Drive TypesM.2 (PCIe, AHCI, M-Key, NGFF)
Drive InstallationFixed
Drive Size22m - M.2 NGFF
InterfacePCI Express
Number of Drives1
Supported Drive Height(s)2242
Additional Supported Drive Heights2260, 2280 and 22110
Performance
Hot Swap CapabilityNo
Type and RatePCI Express 3.0 x4 (8Gbps per lane)
RAIDNo
Connector(s)
Drive Connectors1 - M.2 (PCIe, M-Key, AHCI/NVMe, NGFF)
Host Connectors1 - PCI Express x4 Male
Software
OS CompatibilityOS independent; No software or drivers required
Indicators
LED Indicators1 - Pin header on board for drive LED connection
Environmental
Humidity15% ~ 90% RH
Operating Temperature5°C to 50°C (41°F to 122°F)
Storage Temperature-25°C to 70°C (-13°F to 158°F)
Physical Characteristics
ColorRed
Max Drive Height4.3 in [110 mm]
Product Height7.2 in [18.4 cm]
Product Length7 in [17.9 cm]
Product Width4.8 in [12.1 cm]
Weight of Product1.7 oz [47 g]
Packaging Information
Package Height1.8 in [46 mm]
Package Length6.3 in [15.9 cm]
Package Width8.6 in [21.9 cm]
Shipping (Package) Weight5.3 oz [151 g]
What's in the Box
Included in Package1 - x4 PCI Express® to M.2 PCIe SSD Adapter
Additional Items1 - low-profile bracket; 1 - full-profile bracket (installed); SSD standoff and screw; 1 - quick-start guide

Sources: supplied product file, DeviceDeal product page and official StarTech.com specifications. Product appearance and specifications may change; confirm critical deployment requirements before ordering.

SKU PEX4M2E1
Barcode # 65030865043
Brand Startech
Shipping Weight 0.1300kg
Shipping Width 0.100m
Shipping Height 0.050m
Shipping Length 0.170m
Shipping Cubic 0.000850000m3
Manufacturer warranty
2 Years

This Australian-version product is supplied by DeviceDeal and is covered by the official StarTech.com 2 years manufacturer warranty in Australia.

  • Keep your DeviceDeal tax invoice as proof of purchase.
  • Coverage is subject to StarTech.com warranty terms, eligibility and product assessment.
  • Warranty service does not replace rights that may apply under Australian Consumer Law.

Be The First To Review This Product!

Help other Device Deal users shop smarter by writing reviews for products you have purchased.

Write a product review

StarTech x4 PCI Express to M.2 PCIe SSD Adapter Card, for M.2 NGFF SSD - PEX4M2E1

Model # PEX4M2E1

  • SKU: PEX4M2E1

$45.00
In Stock



More From This Category