Twenty-four protected links
The 1U chassis provides surge protection for 24 Ethernet connections.
The Tycon Power TP-ESP-1G-24RM protects up to 24 Gigabit Ethernet or PoE links in a 1U 19-inch rackmount chassis, with a 70V clamp level and 10kA surge rating.
Key supplied and exact-model details for the TP-ESP-1G-24RM.
The 1U chassis provides surge protection for 24 Ethernet connections.
Each channel supports 10/100/1000Mb Ethernet.
IEEE 802.3af, 802.3at, 802.3bt and passive PoE are supported up to 56V.
The exact product information identifies a 10kA surge rating.
A front-panel grounding stud supports a single-point earth connection.
The full metal 19-inch 1U housing is designed for rack installation.
DeviceDeal is an authorised Tycon Power reseller. This product is supplied with the applicable Tycon Power manufacturer warranty in Australia, subject to the manufacturer’s current terms, eligibility requirements and product assessment.
Helpful answers based on the supplied and exact-model product information.
It provides 24 protected Ethernet channels.
The unit uses a 19-inch 1U rack position.
Each channel supports up to Gigabit Ethernet.
It supports IEEE 802.3af, 802.3at, 802.3bt and passive PoE systems up to 56V.
A front-panel ground stud is provided for connection to the site earth system.
DeviceDeal is an authorised Tycon Power reseller. The applicable manufacturer warranty applies, subject to Tycon Powers terms and assessment.
(TP-ESP-1G-24RM)
Tycon Power TP-ESP-1G-24RM
| Product details | |
|---|---|
| Brand | Tycon Power |
| Model | TP-ESP-1G-24RM |
| Product type | 24-port rackmount Gigabit Ethernet / PoE surge protector |
| Port count | 24 |
| Rack format | 19-inch 1U |
| Network and PoE | |
| Network data rate | 10/100/1000Mb |
| PoE compatibility | IEEE 802.3af, 802.3at, 802.3bt and passive PoE |
| Maximum PoE system voltage | Up to 56V |
| Protected conductors | All 8 Ethernet wires per channel |
| Cable compatibility | CAT5, CAT5e, CAT6 and CAT6a |
| Surge protection | |
| Clamp voltage | 70V |
| Surge rating | 10kA |
| Protection | Common-mode, differential-mode and over-current protection |
| Physical and environmental | |
| Connectors | Shielded RJ45 |
| Housing | Metal |
| Grounding | Front-panel ground stud |
| Operating temperature | -40°C to 85°C |
| Outdoor use | Inside a suitable weatherproof enclosure |
| SKU | TP-ESP-1G-24RM |
| Brand | TYCON POWER |
| Shipping Weight | 2.0000kg |
DeviceDeal is an authorised reseller of Tycon Power. The TP-ESP-1G-24RM is supplied with the applicable Tycon Power manufacturer warranty in Australia. Warranty coverage and claims remain subject to the manufacturer’s current terms, eligibility requirements and product assessment.
Help other Device Deal users shop smarter by writing reviews for products you have purchased.