STARTECH.COM | FAN4SPLIT12

30.48cm 4-Pin PWM Fan Power Splitter Y-Cable

Connect two compatible 4-pin PWM fans to one motherboard fan header with a flexible 12in internal Y-cable.

Power two PWM fans

Connects two 4-pin PWM fans to one compatible motherboard fan header.

30.48cm Y-cable

Adds 12in of flexible reach for positioning two fans inside the computer case.

4-pin fan connections

Provides one 4-pin female input and two 4-pin male outputs.

What to know

Confirm the motherboard fan header supports the combined electrical requirements of both connected fans. This cable splits one header into two fan connections; it does not add a new fan controller or increase the header power capacity.

Australian supply and warranty: Supplied by DeviceDeal as an Australian-market product with the official lifetime StarTech.com manufacturer warranty in Australia. Keep your DeviceDeal tax invoice; terms, eligibility and product assessment apply.

Frequently asked questions

What does the FAN4SPLIT12 do?

It connects two compatible 4-pin PWM fans to one motherboard fan header.

Which connectors are on the FAN4SPLIT12?

It has one 4-pin female input and two 4-pin male fan outputs.

How long is the FAN4SPLIT12?

The cable is 30.48cm, or 12in, long.

How many fans can the FAN4SPLIT12 connect?

It provides connections for two compatible fans from one motherboard header.

Is the FAN4SPLIT12 intended for PWM fans?

Yes. It is specified as a 4-pin PWM fan power splitter cable.

Does the FAN4SPLIT12 increase the fan-header power capacity?

No. Confirm that the motherboard header supports the combined electrical requirements of both fans.

Does the FAN4SPLIT12 require software?

No. It is an internal cable and requires no drivers or software.

What warranty applies to the FAN4SPLIT12?

It is supplied by DeviceDeal as an Australian-market product and is backed by a lifetime StarTech.com manufacturer warranty in Australia.

Not sure this is the right product for your setup? Visit the DeviceDeal Buying Guides.

(FAN4SPLIT12)

Features and highlights

Connects two 4-pin PWM fans to one motherboard fan header
One 4-pin female input connector
Two 4-pin male fan output connectors
30.48cm (12in) cable length
Flexible Y-cable layout for fan positioning
Designed for internal computer cooling connections
No software or drivers required
Motherboard header must support the combined fan load
Lightweight 11.3g cable
Lifetime StarTech.com manufacturer warranty

Compatibility check: Check the motherboard manual for fan-header compatibility and available power capacity before connecting two fans. The splitter does not provide independent fan-control hardware.

Specifications

Product type	4-pin PWM fan power splitter extension cable
Application	Connect two compatible fans to one motherboard fan header
Connector configuration	one 4-pin female input and two 4-pin male fan outputs
Cable length	30.48cm (12in / 1ft)
Supported device	Computer / CPU fan with compatible 4-pin connection
Signal or power conversion	No; direct cable connection
Software	No drivers required
Installation note	Confirm the host header supports the combined connected-fan load
Product weight	11.3g
Package quantity	1
In the box	1 × FAN4SPLIT12 fan cable
Warranty	Lifetime StarTech.com manufacturer warranty

SKU	FAN4SPLIT12
Barcode #	65030844598
Brand	Startech
Shipping Weight	0.0200kg
Shipping Width	0.100m
Shipping Height	0.050m
Shipping Length	0.150m
Shipping Cubic	0.000750000m3

Warranty and Australian supply

FAN4SPLIT12 is supplied by DeviceDeal as an Australian-market product and carries the official lifetime StarTech.com manufacturer warranty in Australia.

Keep your DeviceDeal tax invoice as proof of purchase. Warranty service is subject to StarTech.com terms, eligibility requirements and product assessment.